company tower banner

ALTECH® PA6 A 1000/209

MOCOM Compounds ALTECH® PA6 A 1000/209 is a polyamide 6 base polymer with easy release (demolding), easy flow, and fast solidifying properties, and is heat stabilized. It is suitable for electrical and electronic components and injection molded parts such as thin walled parts, protection caps, and functional components. Pre-drying Conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of <0.15%. Processing Injection molding should use a melt temperature of 250-270°C and a mold temperature of 40-80°C. It should be stored dry and protected from light, not exceeding 30°C.

Brand: ALTECH (305 products)

Polymer Name: Polyamide 6 (PA 6)

Functions: Resin

Processing Methods: Injection Molding

Chemical Family: Polyamides

Labeling Claims: Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free

Additives Included: Heat Stabilizer

Features: Fast Solidifying, Good Flow, Good Mold Release, Heat Stabilized

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Additives Included: Heat Stabilizer
Chemical Family: Polyamides
Polymer Name: Polyamide 6 (PA 6)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

Labeling Claims: Azo Colorants-free,
Azo Dyes-free,
Conflict minerals-free,
PAH-free,
PFOA-free,
PFOS-free,
Persistent Organic Pollutants (POP)-free
Materials Features: Fast Solidifying,
Good Flow,
Good Mold Release,
Heat Stabilized

Applications & Uses

Plastics & Elastomers End Uses: Electrical Components,
Electrical/Electronic Applications,
Protective Caps,
Thin-walled Parts
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties


	Value	Units	Test Method / Conditions
Flexural Modulus (Dry)	2800.0	MPa	ISO 178
Flexural Stress (Dry, 3.5% Strain)	95.0	MPa	ISO 178
Tensile Modulus (Dry)	3200.0	MPa	ISO 527
Tensile Stress at Yield (Dry)	90.0	MPa	ISO 527
Tensile Elongation at Yield (Dry)	3.8	%	ISO 527
Tensile Elongation at Break (Dry)	15.0	%	ISO 527
Impact Strength (Dry, Charpy, at 23°C)	no break	kJ/m²	ISO 179/1eU
Notched Impact Strength (Dry, Charpy, at 23°C)	4.0	kJ/m²	ISO 179/1eA

Physical Properties


	Value	Units	Test Method / Conditions
Density (Dry)	1130.0	kg/m³	ISO 1183

Thermal Properties


	Value	Units	Test Method / Conditions
HDT / A (Dry, 1.8 MPa)	65.0	°C	ISO 75-1/-2
DSC (Melt Point, Dry)	220.0	°C	ISO 11357

Typical Properties


	Value	Units	Test Method / Conditions
Moisture Content	max. 0.15	%	-

Flammability


	Value	Units	Test Method / Conditions
Flammability (Dry, 1.5 mm)	V - 2	class	UL 94
UL Recognition (Dry)	yes	-	-

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Melt Temperature	250 - 270	°C	-
Mould Temperature	40 - 80	°C	-

Rheological Properties


	Value	Units	Test Method / Conditions
Shrinkage (Lengthwise, 24h)	1.2 - 1.4	%	ISO 294-4
Shrinkage (Lateral, 24h)	1.2 - 1.4	%	ISO 294-4

Regulatory & Compliance

Certifications & Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS),
EC No.1907/2006,
IATF 16949,
ISO 13485,
ISO 14001,
ISO 17025,
ISO 45001,
ISO 50001,
ISO 9001,
REACH (Europe),
REACH (UK),
RoHS Compliant,
SVHC Compliant

Technical Details & Test Data

Pre-Drying Conditions

80 °C in a dry air (dessiccant) dryer for 2-12 h
Dependant on moisture content

Storage & Handling

Storage Conditions: Store in dry, protected from light not above 30°C.