Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Physical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus (Dry) | 10500.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 110.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 9800.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 65.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 1.0 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 15.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Dry, Charpy, at -40°C) | 12.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Dry, Charpy, at 23°C) | 2.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Dry, Charpy, at -40°C) | 2.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density (Dry) | 1510.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.12 | % | - |
| Value | Units | Test Method / Conditions | |
| HDT / A (Dry, 1.8 MPa) | 230.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 263.0 | °C | ISO 11357 |
| Thermal Conductivity (integral) | 2.3 | W/(m K) | ISO 22007-2 |
| Specific Heat Capacity | 1.6 | J/gK | - |
| Thermal Conductivity (in-plane) | 5.0 | W/(m K) | ASTM E 1461 |
| Thermal Conductivity (through-plane) | 1.5 | W/(m K) | ASTM E 1461 |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength (Dry) | 54.0 | kV/mm | IEC 60243-1 |
| Surface Resistance | 1 x 10¹² | Ohm | DIN EN 62631-3-2 |
| Tracking Resistance (CTI, Dry) | 600.0 | - | IEC 60112 |
| Value | Units | Test Method / Conditions | |
| Flammability (Dry, 1.5 mm) | HB | class | UL 94 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 300 - 320 | °C | - |
| Mould Temperature | 100 - 120 | °C | - |
| Value | Units | Test Method / Conditions | |
| Shrinkage (Lateral, 24h) | 0.5 - 0.7 | % | ISO 294-4 |
| Shrinkage (Lengthwise, 24h) | 0.5 - 0.7 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
80 °C in a dry air (dessiccant) dryer for 2-12 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.