Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus 2800.0 MPa ISO 178 Flexural Stress (3.5% Strain) 63.0 MPa ISO 178 Tensile Modulus 2600.0 MPa ISO 527 Tensile Stress at Yield 41.0 MPa ISO 527 Tensile Elongation at Yield 2.1 % ISO 527 Tensile Elongation at Break 10.0 % ISO 527 Impact Strength (Charpy, at 23°C) 50.0 kJ/m² ISO 179/1eU Impact Strength (Charpy, at -40°C) 30.0 kJ/m² ISO 179/1eU Notched Impact Strength (Charpy, at 23°C) 9.0 kJ/m² ISO 179/1eA Notched Impact (Charpy, at -40°C) 4.0 kJ/m² ISO 179/1eA Ball Indentation Hardness (H358/30) 105.0 MPa ISO 2039-1 - Physical Properties
Value Units Test Method / Conditions Density 1170.0 kg/m³ ISO 1183 - Thermal Properties
Value Units Test Method / Conditions Vicat B50 95.0 °C ISO 306 HDT / A (1.8 MPa) 85.0 °C ISO 75-1/-2 - Typical Properties
Value Units Test Method / Conditions Moisture Content max. 0.02 % - - Optical Properties
Value Units Test Method / Conditions Tristimulus Value Y10 of Reflection 93.0 % DIN 5033 Tristimulus Value Y10 of Transm.,d=0.5mm 0.4 % ISO 13468 - Processing Information (Injection Molding)
Value Units Test Method / Conditions Melt Temperature 220 - 260 °C - Mould Temperature 50 - 80 °C - - Rheological Properties
Value Units Test Method / Conditions Melt Index (MVR) 25.0 cm³/10min ISO 1133 MVR Temperature 220.0 °C - MVR Load 10.0 kg - Shrinkage (24h) min. 0.5 % ISO 294-4
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 4-8 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.