Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Manus Products Company Logo

Manus-Bond 73-A

Manus-Bond 73-A is a one component room temperature curing silicone elastomeric adhesive/sealant. Does not require the addition of activators or catalysts. Especially designed for bonding and sealing a wide variety of structural materials such as glass, steel, aluminum and plastics and has exceptional resistance to weathering and temperature extremes.

Brand: Manus-Bond (16 products)

Product Type: 1K (1 component) Adhesive, Structural Adhesive

Compatible Substrates & Surfaces: Aluminum, Glass, Metal, Plastics, Steel

Chemical Family: Silicones

Technical Data SheetSafety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Silicones
Product Type
1K (1 component) Adhesive,
Structural Adhesive
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Adhesives & Sealants
Contact Adhesives

Features & Benefits

Ready-to-Use Product Features
Good Weather Fastness

Applications & Uses

Markets
Adhesives & Sealants,
Building & Construction
Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
Building & Construction — Other Building & Construction Applications
Compatible Substrates & Surfaces
Aluminum,
Glass,
Metal,
Plastics,
Steel
Surface Preparation

Apply to clean, dry surlaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying 73-A.

Painting

Painting is not recommended overany silicone. If your application requires a paintable sealant, consult Manus Products for recommended alternatives.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Complete Cure4 days--
Tack Free Time30.0minutes-
Extrusion Rate2.0Seconds-
Hardness25.0-Shore A
Weight Loss (Heat Aging)3.0%-
Stain & Color ChangeNo staining or vehicle migration--
Durability (Aluminum)No bond loss--
Durability (Glass)No bond loss--
Bubble FormationConforms--
Tensile Strength280.0psi-
Adhesion in Peel (Glass)12.0pli-
Adhesion in Peel (Aluminum)15.0pli-
Adhesion in Peel (After UV Through Glass)7.0pli-
Service Temperature(-80) - 400°F

Regulatory & Compliance

Certifications & Compliance
USDA Certified
Confirmity

Conforms to Federal Specifications TT-S-0230C and TT-S-01543A. Also conforms to ASTM C920 and AAMA 802.3-92, Types I and II. Clear, white and black, when properly cured, meet the requirements of FDA regulation 21CFR 177.2600.

Safety & Health

Precautions

Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin. Do not take internally.

Packaging & Availability

Packaging Type
Cartridges
Packaging

10.3 fl. oz. cartridge, 1 gallon, 5 gallon and 55 gallon containers.

Limited Warranty

Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling and storage.

Storage & Handling

Storage

Minimum one year in unopened containers at temperatures not exceeding 80F.