Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- INCI Name
- Ingredient Origin
- Vitamin Type
- Cosmetic Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Formulation
Incorporation: The liposomal active ingredients (AI) commercialized by Lipomize are liquid dispersions that can be mixed with the cream or gel matrix, in no more than a 5 or 10% respect to the final product. A higher percentage application could cause significant changes in the texture and/or viscosity of the matrix (noting that an important part of the liposomal dispersion given is water). Otherwise, a lower percentage application would naturally lead to a final product with a low concentration of AI transported in liposomes. Liposomes are entities relatively sensitive to temperature and oxidation, via direct sunlight and extended air exposure. Because of that, it is important to take into account the following comments:
1) It is preferred to incorporate the liposomal dispersion on the matrix in a last mixing stage at room temperature, prior to fractionating the product.
2) Keep the container with the liposomal dispersion open, as little time as possible.
3) Work away from direct sunlight.
In general a liposomal active ingredient can perfectly coexist with a non-liposomal active ingredient within a cream or a gel. However, it is strongly recommended that during the elaboration of the final product, THESE ACTIVE INGREDIENTS (liposomal and non-liposomal) NOT BE MIXED BEFORE, but that they be incorporated sequentially into the matrix, homogenizing correctly between one aggregate and another. The following figure outlines the possible situations.
For simplicity, the CORRECT PROCESS shows the liposomal AI/non-liposomal AI sequence, but the reverse sequence can also be used. The importance lies in the correct and complete homogenization between the addition of the different AIs.
Thermostability: Temperatures of up to 50 °C for a short time do not affect the stability of the product.
Properties
- Physical Form
- Odor
- Characteristic
- Appearance
- Opaque viscous liquid
- Physico-Chemical Properties
Value Units Test Method / Conditions Particle Size 300 - 900 nm pH 4.00 - 6.00 - Direct pHmeter - Microbiological Values
Value Units Test Method / Conditions Enterobacters Absence - AFNOR validated method by 3M 01/0609/97 Molds and Yeasts max. 1000 CFU/ml AOAC official method 2014.05 Total Aerobics max. 1000 CFU/ml AOAC official method 990.12 - Composition
Value Units Test Method / Conditions Retinol 0.25 - 0.35 % - Sunflower Phosphatidylcholine 0.50 - 1.00 % -
Regulatory & Compliance
- Quality
All raw materials used comply with the laws and regulations quality requirements applicable. This product does not contain any physical, chemical or biological agent in such amounts that may pose a health risk to the final consumer.
- Legal Note
LIPOMIZE SRL is not responsible for the improper use of this product. This includes, but is not limited to: use outside the expiration date, use in products for which it has not been recommended, use in quantity in which it has not been recommended
Packaging & Availability
- Packaging Type
- Packaging
Sanitized plastic container, sealed and opaque of 1L, 5L, 10L, 20L.
Storage & Handling
- Shelf Life
- 18 Months
- Storage
- Closed Packaging: Keep in a cool and dry place, away from direct sunlight
- Open Packaging: Suggested keep refrigerated below 25 °C. DO NOT FREEZE
- Shelf Life
18 months after production in sealed original packaging. As it is a product with natural extracts of vegetable origin, it is possible to observe color differences between different batches. For the same reasons and with the passage of time, precipitates may appear in an amount not greater than 0.1% by weight, but in no case does it mean that the quality of the product has undergone alterations