Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Characteristics
- Orange peel effect
- Good chemical resistance
- Good mechanical properties
- Good durability
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Dilution
- Component A: 900 ml
- Component B: 300 ml
- Solvent: 50 - 150 ml
- Substrate Preparation and Application Parameters
Substrate Preparation:
- Stoppani polyurethane undercoats: Dry sanding with P 280-320 paper
- Stoppani epoxy primers: Dry sanding with P 280-320 paper
- Old thermosetting coatings: Carry out a compatibility test by painting a small part of the hull or by doing a solvent test. In case of softening or matting dry sand with P 280-320 paper and remove the old coating completely.
Application:
- By brush, roller or spray with traditional spray gun or HVLP.
- Relative humidity: max. 80%
- Spray Temperature: 10 - 35°C
- Substrate temperature: 5°C greater than dew point
- Mixing Ratio
Brush or roller:
- Component A: 900 ml
- Component B: 300 ml
- Thinner: 50-100 ml
Spray:
- Component A: 900 ml
- Component B: 300 ml
- Thinner: 100-150 ml
- Drying Time
10°C 20°C 35°C Sanding After min. 96 h min. 48 h min. 24 h Overcoat by Roller After 48 - 72 h 24 - 36 h 12 - 18 h Overcoat by Spray After 2 - 16 h 1 - 8 h 30 mins - 4 h
Properties
- Color
- Typical Properties
Value Units Test Method / Conditions Number of Coats 2.0 - - Film Thickness 200.0 μ - Drying Time (20°C) 24.0 Hour - Coverage Area (DFT=90 μ) 2.6 m²/l - Specific Weight (Part A) 1.52 - 1.62 g/ml - Specific Weight (Part B) 0.95 - 1.05 - -