Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Product Application
Cosmonate PH is widely used as raw materials to manufacture industrial goods, living goods and sports goods and SPANDEX, shoe sole, TPU elstomer, synthetic leather, paint and adhesive.
Properties
- Physical Form
- Appearance
- White Solid
- Typical Properties
Value Units Test Method / Conditions Degree of Purity Min. 99.8 wt% ASTM D 1638 NCO Content 33.6 wt% ASTM D 1638 APHA Color Tone max. 20 - ASTM D 1638 H.C Content max. 0.002 wt% ASTM D 1638 C/H Hydrolyzable chloride max. 0.2 wt% ASTM D 1638 Viscosity (25°C) SOLID cps ASTM D 1638 Specific Gravity (25℃) 1.2 - ASTM D 1638 Boiling Point 314 ℃ - Freezing point 38.7 ℃ - Evaporation Pressure (25℃) 0.01 mmHg - Ignition Point 196 ℃ - Molecular Weight 250 g/mol -
Safety & Health
- Safety and Health
Skin contact might cause rash or inflammation and eye contact might cause severe pain and excessive exposure might cause sight disorder. Also, if you inhaled MDI steam, it would cause bronchial asthma, headache, difficulty to breathing, and etc, and in case of taken, it will cause stimulation and inflammation of digestive organs. If contacted with skin, wash out with much water or soapy water. If contacted with eyes, wash out with much water or soapy water for about 15 minutes and get medical examination. Also, if you inhaled MDI steam, move to the fresh area, keep warm stabilized, and practice artificial respiration when it's necessary. If swallowed, feed much water or milk, or raw egg and make them throw up, then get medical examination as soon as possible. It has very rare ignition danger, but watch out for fire hazard if digested, carbonic acid gas digestion is suitable. In case of conflagration, put out with water.
Packaging & Availability
- Packaging Type
- Product packaging
Cosmonate PH uses 235kg drum package or bulk supply
Storage & Handling
- Storage and Handling
The proper temperature of cosmonate PH is 40~45℃ in liquid state and when out of this temperature range, dimer will rapidly generate and transmute. So it needs to be carefully stored and treated. Also, if stored as solid, it needs to be maintained below 0℃ and opened product should be burnt down soon because if it is left in air, dimer and urea factor will rapidly increase and it would cause the inferiority occurrence. Be extremely cautious so that water doesn't get mixed in storage instrument and seal the instrument with dry nitrogen gas. In case of working with MDI, wear the proper safety tools. If necessary, install ventilation equipment or wear gas mask. After work, be certain to wash with soapy water and clean the contaminated overalls before you wear it.