Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
- Chemical structure
Applications & Uses
- Markets
- Applications
- Product Application
Cosmonate MC-70 is a special modified MDI, which is widely used for making automobile seat cushions and back foams. Cosmonate MC-70 is liquid at room temperature and can be stored and handled easily in the temperature of up to 10℃. In its solvent-free form, it provides a viscosity of up to 15 cps (25℃).
Properties
- Physical Form
- Appearance
- light brown liquid
- Typical Properties
Value Units Test Method / Conditions NCO Content 36.0 ~ 37.0 wt% ASTM D 1638 Viscosity (25°C) max. 15 cps ASTM D 1638 H.C Content max. 0.3 % ASTM D 1638 Acid content max. 0.1 % ASTM D 1638 Specific gravity (25℃) 1.21 ~ 1.23 - ASTM D 1638 Boiling point 208 ℃ - Freezing point Below 10 ℃ - Vapor pressure (25°C) negilgible mmHg - Flash point 177 ~ 218 ℃ -
Safety & Health
- Safety and Health
Skin contact might cause rash or inflammation and eye contact might cause severe pain and excessive exposure might cause sight disorder. Also, if you inhaled MDI steam, it would cause bronchial asthma, headache, difficulty to breathing, and etc, and in case of taken, it will cause stimulation and inflammation of digestive organs. If contacted with skin, wash out with much water or soapy water. If contacted with eyes, wash out with much water or soapy water for about 15 minutes and get medical examination. Also, if you inhaled MDI steam, move to the fresh area, keep warm stabilized, and practice artificial respiration when it's necessary. If swallowed, feed much water or milk, or raw egg and make them throw up, then get medical examination as soon as possible. It has very rare ignition danger, but watch out for fire hazard if digested, carbonic acid gas digestion is suitable. In case of conflagration, put out with water.
Packaging & Availability
- Packaging Type
- Product packaging
Cosmonate MC-70 uses 250kg drum package or bulk supply.
Storage & Handling
- Storage and Handling
The normal keeping temperature for MC-70 is 25~35C. Be cautious not to mix moisture into the storage container, and seal the container with dry nitrogen gas by all possible means. When working with MDI, make sure to put on adequate safety outfits and when necessary, put on gas mask or set up ventilation facilities. After the operation, make sure to wash up with soap, and to wash contaminated overalls thoroughly before wearing.