KIWO PREGAN C4

Enhanced TDS

Markets: HI&I Care
Applications: HI&I Care — Home Care
Surface Care
HI&I Care — Institutional & Industrial Care
Industrial Cleaning
Application Area: Screen
Application Method: Brush
Application: Before decoating the screen, remove all ink with a scraper or spatula. Rub both sides of the screen with a rag soaked in PREGAN C4 until all ink residue is completely dissolved or emulsified, until the emulsion becomes clearly visible, then rinse well with water.

Reclaim the screen as usual with STENCIL REMOVER, PREGASOL CL or PREGASOL EP33. Should any ink residue remain on the screen, pour PREGAN C4 onto the screen and brush the screen every few minutes until the residue is dissolved or emulsified. Remove the dissolved residue with a rag or by rinsing with water.

So called “ghost-images” that have not been caused by a deformation of the fabric, are best removed by using a mixture of PREGAN PASTE and PREGAN C4 or by using HAZE REMOVER or PREGAN ANTIGHOST in combination with PREGAN C4. See Technical Information of PREGAN ANTIGHOST or PREGAN PASTE for additional information.

Physical Form

Liquid

Physical Properties

Personal Protection: All working areas should be well ventilated. Avoid contact with eyes and skin. It is recommended to wear protective glasses and gloves.
Environmental Protection: The working solution should not be emptied into the drains. Consult local authorities for local regulations. See Safety Sheet for additional information.