Kish Industries HYBLUILD FLOOR COATING

Kish Industries Hybluild Floor Coating is an epoxy-amine high build system with excellent hardness, good gloss, and good chemical, water, and impact resistance which has high gloss finish.

Product Type: Epoxy Coating

Features: Chemical Resistant, High Gloss, Impact Resistance, Water Resistant

Application Method: Roller

Chemical Family: Epoxy & Epoxy Derivatives

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Features & Benefits

Applications & Uses

Markets
Applications
Application Method
Application
  • Mixing Instructions:

Mix 1:1 by volume of two component. Mix thoroughly and let stand for 15-20 minutes.

  • Surface Preparation:

Surface must be clean from oil, dust, grease, waxes and other foreign or loose materials that could prevent good adhesion. Acid etching, sandblasting or scarifying may be used if necessary.

  • Application:

Coating can be applied with roller.

  • Clean Up:

Do not let the mixed coating get hard on equipment. Equipment can be cleaned with glycol ethers or ketones.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Solids by Weight95%
Solids by Volume93%
Spreading Rate (6 mils dry film thickness)260sq. ft./gallon
Dry to Touch1 - 2hours
Dry Hard10 - 12hours
Recoat Time2 - 4hours

Technical Details & Test Data

Drying Time

Drying time is very much dependent on temperature in normal conditions

Packaging & Availability

Packaging

1's, 5's, or drums.

Storage & Handling

Pot Life

3-5 hours. The higher the temperature the shorter the pot life.

Shelf Life

Greater than 1 year.