Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Exceptional Bonding Capabilities – No primers needed; direct to most surfaces including ferrous and non-ferrous metals without destructive surface preparation
- Types of Surfaces – Concrete, stained concrete, carbon steel, aluminum, galvanized metal, stainless steel, fiberglass, wood, clay/masonry surfaces, stone, hardwood, terrazzo, vinyl composition tile (VCT), vinyl sheeting, ceramic and other tile and grout surfaces with the addition of adhesion plus
- Permeability – 2.43 Perms – Water barrier not vapor barrier; allows water vapors to migrate through the coating into the atmosphere; providing the substrate is not susceptible to water pooling
- Ultraviolet Insensitivity – No clear coat needed for better UV protection
- Low to Zero VOCs – The volatile organic compounds (VOCs) are Less than 30 grams / liter
- Virtually Odorless - Does not require special breathing apparatus / respirators and does not omit any free monomers after parts A & B are mixed
- Produced in Total Water – Does not use solvents, exempt solvents or any co-solvent
- Thermal Stability – Has a high coefficient of linear expansion
- Does Not Contain Proposition 65 Chemicals – These chemicals are known to the state of California to cause cancer and birth defects
- For Interior or Exterior Use – Allows for a high performance urethane to be used indoors while the building is in operation
- Meets U.S. Building Councils’ LEED Criteria – Under EQ 4.2 for Low-emitting paints and coatings
- Flame Spread – (ASTM 84); Result = 10 which is Class A / Type I (0 – 25 Flame Spread Index)
- Smoke Developed – (ASTM 98); Result = 5 which is Class A / Type I (0 – 450 Smoke Developed Index)
- For Vertical or Horizontal Surfaces
- Increased Co-Efficient of Friction – Products certified by the National Floor Safety Institute as High Traction with a wet co-efficient of friction rating greater than 0.60
- Provides Anti-Graffiti Properties – Paint, spray paint and makers can be removed without damaging the coating
- Inherent Dry Erase Characteristics – Can turn entire walls or tables into dry erase boards without ghosting / shadowing
- Brush, Roll, or Spray Application
- Very Repairable – Small sections can be repaired without noticing or redoing the entire section
- Cool Roof Rated Product – Tested for 3 years at 3 different weather farms (FL, OH and AZ) and sent to UL for evaluation of the solar reflectance (Initial 0.83 and Aged 0.78) and thermal emittance (Initial 0.91 and Aged 0.85). Applying for ENERGY STAR certification as the results meet that distinction.
- Additives
- GripLok-to increase slip co-efficient of friction; reduces gloss toa matte/satin appearance depending on the quantity added.
- GripLok Gloss - to increase slip co-efficient of friction,; larger particle uses less additive thus maintaining a glossy appearance.
- Accelerator - to shorten the dry time.
- Adhesion Plus - to increase adhesion properties to hard to adhere to surfaces such as ceramic, porcelian and other tile and grout.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
Properties
- Typical Properties
Value Units Test Method / Conditions Dry Time 6 - 8 hrs - Gloss level min. 85 ° - VOCs max. 30 g/l - LEED Credits Yes - - Solvents No - - Prop 65 Chemicals No - - Horizontal Coverage 325 sq.ft.per galon Vertical Coverage 250 sq.ft.per galon
Storage & Handling
- Pot Life
- 90