Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Biodegradable
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
• Avoid musculoskeletal and slippage related injuries • Increase production rates • Achieve closer fits • Reduce part rejects • Improve product performance • Reduce installation forces • Biodegradable • Non-flammable, non-toxic, non-corrosive
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Recommended Uses
P-80® RediLube is ideal for use on most plastics and non-porous and coated rubber parts. Typical applications include installation of seals, tires, O-rings, hoses, bushings, grommets, tires, and grips.
- How To Apply
P-80® RediLube can be applied using automated systems or manually by dip, brush, sponge, or spray techniques.
Properties
- Physical Form
- Appearance
- Milky white to light yellow
- Odor
- Mild
- Typical Properties
Value Units Test Method / Conditions Description Synthetic esters emulsified in water - - Viscosity (at 25°C) 20.0 cps - Estimated dry time min. 20 minutes - pH Value 8.7 - - Sprayable Yes - - Reduction in friction approx. 55 % Freezing point 0.0 °C - Flash point None - - Storage temperature 2˚ – 30˚ °C - Specific gravity 0.98 - - Prop 65 Exempt - - VOC by Volume 0.3 % -
Regulatory & Compliance
- Certifications & Compliance
- Environmental Compliance
Complies with RoHS and REACH (SVHC: none). Cobalt-free; Conflict mineral-free
Safety & Health
- Sewage Disposal
Contents may be disposed of according to local, state and federal regulations. Completely emptied packages can be recycled.
Packaging & Availability
- Packaging Type
Storage & Handling
- Handling
Before dispensing P-80® RediLube from drums, mix with a clean recirculation pump or folding propeller mixer for 5 minutes to ensure a homogenous mixture is drawn off. If a hold tank is used, agitate the lubricant before it is fed to assembly equipment. Smaller containers should be shaken or stirred prior to use. Never use air agitation. Bubbling compressed air through P-80® lubricants may cause separation or spoilage. Do not mix P-80® RediLube with other chemicals. Do not dilute with water. Store P-80® RediLube in a sealed container when not in use. Do not pour dispensed product back into the original container. Use at room temperature.
- Storage
Do not freeze. P-80® RediLube should be stored at temperatures between 2˚ – 30˚C (36˚ – 86˚F) in the original sealed container. Do not store outdoors in direct sunlight during warm weather. The shelf life of P-80® RediLube is 2 years from the manufacturing date.