Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
IMCO Technologies Company Logo

IMCO Technologies 510S URETHANE MAINTENANCE COATING SEALER

510 Moisture Cure Urethanes are extremely durable, single component maintenance coating systems. They have unsurpassed adhesion to a variety of substrates.

Product Type: 1K (1 component) Coating, Sealer

Features: Abrasion Resistant, Acid Resistant, Alkali Resistant, Durable, Flexible, Food Contact Acceptable, Low Temperature Curing, Medium Hardness, Salt Water/Spray Resistant

Compatible Substrates & Surfaces: Concrete, Metal, Steel, Wood

Chemical Family: Urethanes

Technical Data SheetSafety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Urethanes
Product Type
1K (1 component) Coating,
Sealer
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Paints & Coatings
Protective Coatings

Features & Benefits

Ready-to-Use Product Features
Abrasion Resistant,
Acid Resistant,
Alkali Resistant,
Durable,
Flexible,
Food Contact Acceptable,
Low Temperature Curing,
Medium Hardness,
Salt Water/Spray Resistant
Major Advantages
  • Hard, abrasive resistant and flexible
  • Outstanding adhesion: concrete, galvanized steel, wood, urethane foam, tightly adhered old paint etc.
  • Will not soften solvent sensitive coatings, alkyds, vinyls, acrylics
  • Good resistance to acids, alkalis and fresh and salt water.
  • Can be applied at sub-zero temperatures -10°C (14°F)
  • Approved by Canadian Food Inspection Agency (CFIA) for incidental food contact.

Applications & Uses

Compatible Substrates & Surfaces
Concrete,
Metal,
Steel,
Wood
Basic Uses

510C URETHANE MAINTENANCE COATING is an excellent single component clear or color coat for the protection of wood, concrete or steel in harsh industrial environments. For indoor use only. 510S URETHANE MAINTENANCE COATING is an extremely tough clear concrete sealer. For indoor use only.

Steel Coating

Apply the 510C in multiple coats over sandblasted and primed steel. Prime using 510A ALUMINIZED URETHANEPRIMER. 510C can also be used as the chemical resistant urethane finish coat over a variety of priming systems,including zinc rich primers.

Clean Up

With 585 URETHANE SOLVENT before coatings dry

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Flash Point::40 (104)°C (°F)-
Solid by Volume33.0%-
Cure Time( Touch)0.5 hourshours-
Cure Time( Recoat)1-2 hourshours-
Cure Time( Mar-free)4 - 5 hourshours-
Sward Hardness34.0--
Taber Abrasion:18.0mg loss-
CS-17min. 160inlb-
Reverse Impactmin. 160inlb-
Direct Impact4.0hours-
Pot Life510C 1.2 kg/L (10.4 lbs/gal)--
Net Weight:1.1 (9.2)kg/L-
Application temperature-10 (14)°C (ºF)-

Packaging & Availability

Packaging Type
Drums,
Pails

Storage & Handling

Storage

Keep in tightly closed containers to prevent contamination with moisture. Store in a cool, dry place, preferably under 27ºC (81ºF)to insure stability of at least 6 months in original unopened containers.

Special Handling

Use normal precautions such as gloves, coveralls, eye protection and face mask with, cartridges approved for inorganic vapors. When spraying, free isocyanates may be present; use air-fed, full face mask. May cause sensitization in susceptible individuals. Protect skin with barrier creams. Wash skin contact areas thoroughly with lukewarm water. Eye contact; flush with copious amounts of water and obtain medical attention immediately. Maintain adequate ventilation in enclosed areas.