Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- Water-based
- Non-hazardous
- Reusable
- Non-aerosol
- Non-flammable
- Ready-to-use
- Rust remover
- Long term preventative
- Product Benefits and Features
- Removes mill oil, rust, calcium and limescale buildup (without etching)
- Provides a protective coating for long-term rust protection
- Works on all ferrous & non-ferrous metal surfaces
- Reduces labor, time & cost
- Made in the USA
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Guidelines for Tool Cleaning
Important:
- Use iD Eco-Pro 360 as is; do not water down
- Remove loose rust before applying
- Remove any rubber seals
- Remove any oils and/or grease on the surface
- Eco-Pro 360 will dull mirrored finsihes, and require polishing after application
To begin:
- Do a small test area first by brushing or spraying on Eco-Pro 360
- After one minute, wipe or blow off Eco-Pro 360 (if the material is left on too long, it will create a chalky white residue which can be removed with a warm damp cloth)
- Allow mold to air dry, do not rinse.
For Light Rust:
- Spray or brush on Eco-Pro 360, wipe off the excess completely, and wipe dry. A cleaning pad will help speed up the process. If you spray on, use product conservatively; it is recommended to have a brush available to avoid overspray, and ensure an even coating.
For Heavy Rust:
- Dip the cooled, dry part in Eco-Pro 360 at room temperature. Time will vary; start with 10 minutes and increase as necessary. Remove excess product from the surface and wipe dry. Strain/Filter rust out to keep Eco-Pro 360 at its best for re-use.
No Rinsing Required.