Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits
- Fast reacting
- Non-Flammable
- Solvent-free
- Excellent moisture and alkali resistance
- Excellent plasticizer resistance
- When dry, does not promote growth of mold or mildew
- Low odor
- Easy to trowel
- Excellent indentation resistance
- Sets to a flexible, permanent bond
- FloorScore® Certified
- LEED Points Contribution and LEED Points
- MR Credit Regional Materials up to 2 points
- IEQ Credit 4.1 Low-Emitting
- Materials Adhesives and Sealants 1 point
Applications & Uses
- Markets
- Applications
- Application Area
- Application
Substrates to be bonded shall be clean and free from moisture, dirt, oil and other contaminants. Very smooth surfaces should be lightly abraded. Position material on floor or wall and mark area. This will be used as guidelines to which adhesive will be applied. Adhesive is applied by brushing. Apply adhesive evenly to both surfaces. Avoid heavy or excessive applications. When applying contact adhesives to porous materials such as plywood and edges, it is advisable to apply two coats. Apply the first coat and allow to dry. This will act as a sealer. When dry apply the second coat and allow to dry properly before bonding. This helps to ensure that the adhesive will not soak into the board and that there is the proper amount on the surface to achieve a strong, permanent bond. Allow the adhesive to properly dry before bonding. When dry, adhesive will not transfer to finger. Normal dry time is 20 - 40 minutes, but will vary depending on temperature, humidity and coat weight. Dry time can be reduced using air movement. Bonds can be made as soon as the adhesive is dry. Carefully position material along guidelines. A strong bond is achieved instantly upon contact. Once adhesive is dry, materials shall be positioned into adhesive within 90-minutes. After material is positioned, roll area with a hand roller to ensure contact over the entire bonded area.
- Clean-up
Remove wet adhesive immediately with a clean cloth dampened with mineral spirits, isopropanol or acetone. Cured adhesive is very difficult to remove. Do not apply solvents directly to flooring. Use caution when handling flammable solvents.
Properties
- Coverage
- Varies
- Typical Properties
Value Units Test Method / Conditions Open Time 90 Minutes - VOC max. 1 grams/liter SCAQMD Rule1168
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Testing Methods
- Shelf Life (ASTM D1337)
- Adhesive Shear Strength (ASTM D6004)
- 90° Peel Resistance (ASTM D6862)
Safety & Health
- General Warranty & Precautions
Helmitin warranties its private label adhesive formulations to be free of all manufacturing defects. The warranty period shall be in place for one (1) year from the date of installation and will also be guided by the date of manufacture to insure the integrity of the formulation and that proper storage and shipment of same has taken place. Please contact Helmitin for detailed warranty information. Carefully read and follow all precautions and warnings. Keep out of reach of children
- General Warranty & Precautions
Helmitin warranties its private label adhesive formulations to be free of all manufacturing defects. The warranty period shall be in place for one (1) year from the date of installation and will also be guided by the date of manufacture to insure the integrity of the formulation and that proper storage and shipment of same has taken place. Please contact Helmitin for detailed warranty information. Carefully read and follow all precautions and warnings. Keep out of reach of children
Packaging & Availability
- Packaging Type
- packaging
HELMIBOND 6504 is available in 1-quart units (12-quarts per carton) and 1-gallon units (4-gallons per carton).
Storage & Handling
- Shelf Life
Adhesive shall be stored in a dry, climate-controlled area. Shelf life is 18 months in unopened, properly stored containers. Avoid storage of product in direct sunlight.
- Freeze-thaw
Protect from freezing