Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Applications
- Domacryl 507 50 X/BAc is intended for crosslinking with isocyanate resins for two-component systems for air and stoving enamels for metal, wood and plastics.
- Ratio of acrylic resin to melamine resins is approximately 75:25 % (calculated on solid resin).
- Enamels based on Domacryl 507 50 X/BAc gives hard films with good adhesion and gloss.
- They are heat and UV resistant.
- Crosslinking with aliphatic isocyanates is recommended for the formulation of non-yellowing finishing. Physical drying can be accelerated with the addition of CAB resins.
Properties
- Soluble in
- Acetone, Toluene, Ethyl acetate, Xylene, Aromatic solvent 100, Methoxy propyl acetate, Methyl isobutyl ketone, n-butyl acetate
- Typical Properties
Value Units Test Method / Conditions Density 1 kg/L - Flash Point 24 °C - Hydroxyl Content (on Solid Resin) 2 % - Solvent Ratio (Xylene / Butyl acetate) 9 / 1 - - Water Content max. 0.1 wt.% -
Technical Details & Test Data
- Compatibility
- Compatible with HDI-isocyanurate, Vinyl VAGH and nitrocellulose (ester soluble).
- Limited compatibility with HDI-biuret and other Domacryl hydroxy resins.
- Incompatible with CAB 551-0.2.
Storage & Handling
- Storage
- The resin should be stored indoors in its original, unopened and undamaged container in a dry place at storage temperatures below 35 °C, for up to 12 months. Exposure to direct sunlight should be avoided.