Havel Composites CZ sro Epoxy resin LH 330

• High flexibility and toughness
• Workability time / so-called pot life / by
• About 60 min. up to about 80 min.

• Coatings tI. 1-4mm.
• Adhesives, Castings
• Electrical insulation of electronic components a
• Imanufacture of flexible laminates

These are laminar, potting (small-volume) systems with low viscosity, not containing solvents or fillers, intended for curing at room temperature or slightly elevated (up to 45 ° C) temperature. The systems are suitable for the production of glass, carbon and reinforced parts aramid fibers, which are characterized by high flexibility, toughness and adhesion to most material. Pot life in the crucible varies from about 20 minutes to 90 minutes. Thanks Due to their excellent adhesive properties, these systems can also be used as adhesives for wood, metal, glass, concrete and countless types of plastic. Fillers (eg metal powder, dust, cotton flakes, etc.) can be mixed to achieve special system properties. Due to the elongation at 6-9%, which is advantageous when used as a laminating resin, the strength is in cut and peel resistance a little lower than our special adhesives pryskyric.

At temperatures between 20 ° C and 30 ° C All common processing methods

• Standard medium viscosity resins based on bisphenol A. Viscosity: 0.6-0.8 Pas / 25 ° C.
• No crystallization occurs at normal storage temperatures.