Products

Hangzhou Sanhe USA Sorbic Acid is an unsaturated fatty acid. It has inhibitory activity against a wide spectrum of yeasts, molds and bacteria, including most food-borne pathogens. Its inhibitory activity depends upon the pH of the substrate; the upper limit for activity is pH6.5 in most applications and the degree of activity increases as the pH decreases. It has more promising effectiveness of inhibitory activity than benzoic acid.

Acesulfame K is an ideal non-nutritive sweetener for food, beverage, cosmetic and pharmacy industry.

Hangzhou Sanhe USA Potassium Sorbate is commonly regarded as a non-toxic, high effective preservative. It is synthesized from sorbic acid and potassium carbonate.

Tianjutang 50 is a high-sweetness,low-calorie complex sweetener. It is manufactured by mixing the sweetener Acesulfame K, Aspartame and sorbitol. It offers complex advantages for food and beverage manufacturers.

Hangzhou Sanhe USA Calcium Sorbate, synthesized from acid and calcium carbonate, is a non-toxic and highly effective preservative.

Tianjutang 100 is a high-sweetness,low-calorie complex sweetener. It is manufactured by mixing the sweetener Acesulfame K, Aspartame and sorbitol. It offers complex advantages for food and beverage manufacturers.

Tianjutang 200 is a high-sweetness,low-calorie complex sweetener. It is manufactured by mixing the sweetener Acesulfame K, Aspartame and sorbitol. It offers complex advantages for food and beverage manufacturers.

SANHE® FFH10 has good evenness, high viscosity(even higher than 2000 mPa.s),high degree of substitution(above 1.2),high purity(97%-99.5%), high acid resistance(AVR of Type FH9 above 0.9)and high saline resistance(soluble in solution at any salt proportion, SVR in sea water or 4% NaCl solution above 1.0) SANHE®CMC has a fast solution rate and the dissolved solution has good transparency and good flowability.

SANHE® TH9 has good whiteness and transparency and is will dispersed in manufacturing process due to its thixotropy with minimum mechanical wear. The paste made is very white, fine and smooth.

SANHE® FVH6 has good evenness, high viscosity(even higher than 2000 mPa.s),high degree of substitution(above 1.2),high purity(97%-99.5%), high acid resistance(AVR of Type FH9 above 0.9)and high saline resistance(soluble in solution at any salt proportion, SVR in sea water or 4% NaCl solution above 1.0) SANHE®CMC has a fast solution rate and the dissolved solution has good transparency and good flowability.

SANHE® FH9 has good evenness, high viscosity(even higher than 2000 mPa.s),high degree of substitution(above 1.2),high purity(97%-99.5%), high acid resistance(AVR of Type FH9 above 0.9)and high saline resistance(soluble in solution at any salt proportion, SVR in sea water or 4% NaCl solution above 1.0) SANHE®CMC has a fast solution rate and the dissolved solution has good transparency and good flowability.

SANHE® TH10 has good whiteness and transparency and is will dispersed in manufacturing process due to its thixotropy with minimum mechanical wear. The paste made is very white, fine and smooth.

SANHE® FM6 has good evenness, high viscosity(even higher than 2000 mPa.s),high degree of substitution(above 1.2),high purity(97%-99.5%), high acid resistance(AVR of Type FH9 above 0.9)and high saline resistance(soluble in solution at any salt proportion, SVR in sea water or 4% NaCl solution above 1.0) SANHE®CMC has a fast solution rate and the dissolved solution has good transparency and good flowability.

SANHE® FVH9 has good evenness, high viscosity(even higher than 2000 mPa.s),high degree of substitution(above 1.2),high purity(97%-99.5%), high acid resistance(AVR of Type FH9 above 0.9)and high saline resistance(soluble in solution at any salt proportion, SVR in sea water or 4% NaCl solution above 1.0) SANHE®CMC has a fast solution rate and the dissolved solution has good transparency and good flowability.