Flytac

Guangzhou Flying Dragon Chemical Ltd. Brand

Supplier:Guangzhou Flying Dragon Chemical Ltd.

Products:32

We deal with Tackifiers based on Rosin, Rosin Derivatives and Petroleum Resins.

View All Flytac Products

Flytac 102

Chemical Family:Modified Rosins
Functions:Tackifier
End Uses:Hot Melt Adhesive, Pressure Sensitive Adhesive
Compatible Polymers & Resins:Styrene Butadiene Styrene (SBS), Chloroprene Rubber (CR), Natural Rubbers (NR), Ethylene Vinyl Acetate (EVA), Styrene Isoprene Styrene (SIS)
Labeling Claims:Low VOC
Features:Good Heat Stability, High Viscosity, Improved Ageing Resistance
Synonyms:Resin Acid Pentaerythritol Esters

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 (Water White Rosin Ester)

Chemical Family:Rosins
Functions:Tackifier
End Uses:Waterborne Adhesive, Solventborne Adhesive, Pressure Sensitive Adhesive
Compatible Polymers & Resins:Styrene Butadiene Styrene (SBS), Chloroprene Rubber (CR), Natural Rubbers (NR), Ethylene Vinyl Acetate (EVA), Styrene Butadiene Rubber (SBR), Styrene Isoprene Styrene (SIS)
Features:Good Compatibility, Good Heat Stability, Improved Ageing Resistance
Synonyms:Rosin, hydrogenated

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 192

Chemical Family:Hydrocarbon Derivatives
End Uses:Pressure Sensitive Adhesive, Hot Melt Adhesive
Compatible Polymers & Resins:Polyolefins, Styrene Ethylene Butylene Styrene (SEBS), Styrene Isoprene Styrene (SIS), Ethylene Vinyl Acetate (EVA), Polypropylenes (PP), Styrene Butadiene Styrene (SBS)
Processing Methods:Compounding
Features:Heat Resistance, Excellent Compatibility, Good Adhesion, Good Compatibility
Synonyms:Petrosin

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.

Flytac 190 (Hydrocarbon Resin C9)

Chemical Family:Hydrocarbon Derivatives
End Uses:Tires, Hot Melt Adhesive
Compatible Polymers & Resins:Ethylene Vinyl Acetate (EVA)
Features:Excellent Solubility, Good Compatibility
Synonyms:Caustic Soda, NaOH, Soda Lye, Sodium Hydrate, White Caustic

Flytac 190 is obtained by cracking C9, which mainly contains vinyl toluene, indene, methyl indene, and other unsaturated aromatic compounds. To have the characteristics of both aliphatic and aromatic resins C5 is added in C9, copolymerized, and modified to get C5/C9 copolymer hydrocarbon resin. As a result, this product has improved compatibility with EVA and also has good solubility in various solvents.

Flytac 189 (Hydrocarbon Resin C9)

Chemical Family:Hydrocarbon Derivatives
Functions:Tackifier, Binder & Resin
Features:Good Thermal Stability, Good Chemical Stability, Water Resistance, Excellent Solubility, Chemical Resistant, Water Resistant, Alkali Resistant, Acid Resistant, Good Heat Stability
Synonyms:Petrosin

Flytac 189 is made by C9 cracking through catalytic polymerization. This light yellow granular solid has good heat stability, solubility, water resistance, and very good chemical stability over acid and alkali. It is mainly used as fertilizer in paint, rubber, adhesives, printing ink, plastic floor tile, and modified asphalt industries.

Flytac 120 - 90W

Functions:Tackifier
Chemical Family:Rosins
End Uses:Waterborne Adhesive, Pressure Sensitive Adhesive, Solventborne Adhesive
Compatible Polymers & Resins:Styrene Isoprene Styrene (SIS), Natural Rubbers (NR), Styrene Butadiene Rubber (SBR), Styrene Butadiene Styrene (SBS), Chloroprene Rubber (CR), Ethylene Vinyl Acetate (EVA)
Features:Improved Ageing Resistance, Good Compatibility, Good Heat Stability
Synonyms:Rosin, hydrogenated

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 100W (Water White Rosin Ester)

Functions:Tackifier
Chemical Family:Modified Rosins
End Uses:Pressure Sensitive Adhesive, Solventborne Adhesive, Waterborne Adhesive
Compatible Polymers & Resins:Styrene Butadiene Styrene (SBS), Chloroprene Rubber (CR), Ethylene Vinyl Acetate (EVA), Styrene Isoprene Styrene (SIS), Styrene Butadiene Rubber (SBR), Natural Rubbers (NR)
Features:Good Heat Stability, Improved Ageing Resistance, Good Compatibility

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 117 - 140 (Polymerized Rosin )

Chemical Family:Rosins
End Uses:Varnishes
Features:Oxidation Resistant

Flytac 117 - 140 is a polymerized rosin that is processed with the new advanced sulfuric acid and chloride zinc method. It has many excellent properties such as a high softening point, anti-oxidation, non-crystallizing, and good compatibility with film-forming agents. Typical Uses Ink Adhesive Paint Varnish Soldering flux Synthetic resin

Flytac 117- 115 (Polymerized Rosin)

Chemical Family:Rosins
End Uses:Varnishes
Features:Oxidation Resistant

Flytac 117- 115 is a polymerized rosin that is processed with the new advanced sulfuric acid and chloride zinc method. It has many excellent properties such as a high softening point, anti-oxidation, non-crystallizing, and good compatibility with film-forming agents. Typical Uses Ink Adhesive Paint Varnish Soldering flux Synthetic resin

Flytac 117- 95 (Polymerized Rosin)

Chemical Family:Rosins
End Uses:Varnishes
Features:Oxidation Resistant

Flytac 117- 95 is a polymerized rosin that is processed with the new advanced sulfuric acid and chloride zinc method. It has many excellent properties such as a high softening point, anti-oxidation, non-crystallizing, and good compatibility with film-forming agents. Typical Uses Ink Adhesive Paint Varnish Soldering flux Synthetic resin

Flytac 111 - 101 (Hydrogenated Rosin)

INCI Name:Hydrogenated Rosin
Chemical Family:Rosins
Functions:Tackifier, Binder, Tackifier
Labeling Claims:Foreign matter-free
Synonyms:Rosin, hydrogenated

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 111 - 301 （Water White Hydrogenated Rosin)

INCI Name:Hydrogenated Rosin
Chemical Family:Rosins
Functions:Tackifier, Binder, Tackifier
Labeling Claims:Foreign matter-free
Synonyms:Rosin, hydrogenated

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 106 - F (Hydrogenated Pentaerythritol Rosin Ester)

INCI Name:Pentaerythrityl Hydrogenated Rosinate
Chemical Family:Rosin Esters
Functions:Binder, Film Former, Tackifier
Labeling Claims:Ulta Beauty's Conscious Beauty
Synonyms:Hydrogenated resin acid pentaerythritol esters

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - P (Partial Hydrogenated Pentaerythritol Rosin Ester)

INCI Name:Pentaerythrityl Hydrogenated Rosinate
Chemical Family:Rosin Esters
Functions:Binder, Film Former, Tackifier
Labeling Claims:Ulta Beauty's Conscious Beauty
Synonyms:Hydrogenated resin acid pentaerythritol esters

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac105 -F (Glycerol Ester of Hydrogenated Rosin)

End Uses:Hot Melt Adhesive, Solventborne Adhesive, Contact Adhesive, Waterborne Adhesive, Hair Removal Products, Pressure Sensitive Adhesive, Door Profiles
Functions:Tackifier, Film Former, Binder & Resin
Labeling Claims:Ulta Beauty's Conscious Beauty
Features:Tacky, Good Color Stability, Oxidation Resistant, Excellent Tack Stability
Chemical Family:Rosins
Synonyms:Glycerol ester of partially hydrogenated wood rosin, Hydrogenated rosin glycerides

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 105 - P (Glycerol Ester of Hydrogenated Rosin)

End Uses:Hot Melt Adhesive, Solventborne Adhesive, Contact Adhesive, Waterborne Adhesive, Hair Removal Products, Pressure Sensitive Adhesive, Door Profiles
Functions:Tackifier, Film Former, Binder & Resin
Labeling Claims:Ulta Beauty's Conscious Beauty
Features:Tacky, Good Color Stability, Oxidation Resistant, Excellent Tack Stability
Chemical Family:Rosins
Synonyms:Glycerol ester of partially hydrogenated wood rosin, Hydrogenated rosin glycerides

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - F (Full Hydrogenated Rosin)

End Uses:Solventborne Adhesive, Contact Adhesive, Waterborne Adhesive, Hot Melt Adhesive
Functions:Film Former, Binder & Resin, Antioxidant
Compatible Polymers & Resins:Natural Rubbers (NR)
Features:Good Weather Stability, High Color Strength, Good Color Stability, Oxidation Resistant
Chemical Family:Rosins
Synonyms:Rosin, hydrogenated

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 104 - P (Hydrogenated Rosin)

End Uses:Solventborne Adhesive, Contact Adhesive, Waterborne Adhesive, Hot Melt Adhesive
Functions:Film Former, Binder & Resin, Antioxidant
Compatible Polymers & Resins:Natural Rubbers (NR)
Features:Good Weather Stability, High Color Strength, Good Color Stability, Oxidation Resistant
Chemical Family:Rosins
Synonyms:Rosin, hydrogenated

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 103 - 90 (Glycerol Ester of Rosin)

End Uses:Hot Melt Adhesive
Functions:Stabilizer, Binder & Resin
Compatible Polymers & Resins:Styrene Butadiene Rubber (SBR), Styrene Butadiene Styrene (SBS), Butyl Rubber (IIR), Polypropylenes (PP), Styrene Isoprene Styrene (SIS), Chloroprene Rubber (CR), Polyethylenes (PE), Natural Rubbers (NR), Ethylene Vinyl Acetate (EVA), Acrylics
Features:Excellent Compatibility, Good Thermal Stability, Good Aging Behavior, Good Heat Stability, Low VOC, High Viscosity, Improved Ageing Resistance
Chemical Family:Rosins, Glycerol Esters & Derivatives
Synonyms:Glycerol ester of disproportionated rosin, Glycerol ester of wood rosin

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 103 - E

Chemical Family:Rosins, Glycerol Esters & Derivatives
End Uses:Hot Melt Adhesive
Features:Improved Ageing Resistance, High Viscosity, Good Heat Stability
Synonyms:Glycerol ester of disproportionated rosin, Glycerol ester of wood rosin

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 102 - 100 (Pentaerythritol Ester of Rosin)

Chemical Family:Modified Rosins
Functions:Tackifier
End Uses:Hot Melt Adhesive, Pressure Sensitive Adhesive
Compatible Polymers & Resins:Styrene Butadiene Styrene (SBS), Chloroprene Rubber (CR), Natural Rubbers (NR), Ethylene Vinyl Acetate (EVA), Styrene Isoprene Styrene (SIS)
Labeling Claims:Low VOC
Features:Good Heat Stability, High Viscosity, Improved Ageing Resistance
Synonyms:Resin Acid Pentaerythritol Esters

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100F (Pentaerythritol Ester of Rosin)

Chemical Family:Modified Rosins
Functions:Tackifier
End Uses:Hot Melt Adhesive, Pressure Sensitive Adhesive
Compatible Polymers & Resins:Styrene Butadiene Styrene (SBS), Chloroprene Rubber (CR), Natural Rubbers (NR), Ethylene Vinyl Acetate (EVA), Styrene Isoprene Styrene (SIS)
Labeling Claims:Low VOC
Features:Good Heat Stability, High Viscosity, Improved Ageing Resistance
Synonyms:Resin Acid Pentaerythritol Esters

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 101 - X (Gum Rosin)

Chemical Family:Rosins
Compatible Substrates & Surfaces:Paper
Synonyms:Gum rosin, Liquid rosin, Wood rosin, Yellow resin

Flytac 101 - X is a natural resin that is composed of various resin acids. It can be dissolved easily in many organic solvents and has special chemical activity. It is an important raw material used for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food-grade ester gum, rosin ester resins, etc.

Flytac 101 - WW

Chemical Family:Rosins
Compatible Substrates & Surfaces:Paper
Synonyms:Gum rosin, Liquid rosin, Wood rosin, Yellow resin

Flytac 101 - WW is a natural resin that is composed of various resin acids. It can be dissolved easily in many organic solvents and has special chemical activity. It is an important raw material used for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food-grade ester gum, rosin ester resins, etc.

Flytac 101 - WG (Gum Rosin WG grade)

Chemical Family:Rosins
Compatible Substrates & Surfaces:Paper
Synonyms:Gum rosin, Liquid rosin, Wood rosin, Yellow resin

Flytac 101 - WG is a natural resin that is composed of various resin acids. It can be dissolved easily in many organic solvents and has special chemical activity. It is an important raw material used for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food-grade ester gum, rosin ester resins, etc.

Flytac 101 - N

Chemical Family:Rosins
Compatible Substrates & Surfaces:Paper
Synonyms:Gum rosin, Liquid rosin, Wood rosin, Yellow resin

Flytac 101 - N is a natural resin that is composed of various resin acids. It can be dissolved easily in many organic solvents and has special chemical activity. It is an important raw material used for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food-grade ester gum, rosin ester resins, etc.

Gum Rosin

Chemical Family:Rosins
Compatible Substrates & Surfaces:Paper
Synonyms:Gum rosin, Liquid rosin, Wood rosin, Yellow resin

Flytac 101 - M is a natural resin that is mainly composed of various resin acids. It can be dissolved easily in many organic solvents and has special chemical activity. It is an important raw material used for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food-grade ester gum, rosin ester resins, etc.

Flytac 101 - K

Chemical Family:Rosins
Compatible Substrates & Surfaces:Paper
Synonyms:Gum rosin, Liquid rosin, Wood rosin, Yellow resin

Flytac 101 - K is a natural resin that is composed of various resin acids. It can be dissolved easily in many organic solvents and has special chemical activity. It is an important raw material used for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food-grade ester gum, rosin ester resins, etc.

Flytac 107 (Disproportionated Rosin)

Ingredient Name:Disproportionated Gum Rosin
Chemical Family:Rosins
Functions:Tackifier, Tackifier
Synonyms:Gum rosin, Liquid rosin, Wood rosin, Yellow resin

Flytac 107 is a derivative of gum rosin obtained by chemical treatment to reduce the abietic acid content. It is used as a tackifier for pressure-sensitive adhesives, manufacture of SBR and other synthetic rubbers, and is an important component for making potassium soaps and ABS, etc.

Flytac 114 (Maleic Rosins)

Chemical Family:Modified Rosins, Maleics
Features:Heat Resistance, Excellent Adhesion, Yellowing Resistance, Good Color Stability
Synonyms:(2Z)-2-Butenedioic acid, (2Z)-Butene-2-dioic acid, (Z)-2-Butenedioic acid, 2-Butenedioic acid (2Z)-, 2-Butenedioic acid (Z)-, cis-1,2-Ethylenedicarboxylic acid, cis-2-Butenedioic acid, cis-Butenedioic acid, Maleinic acid, Malezid CM, Toxilic acid

Flytac 114 is a slightly yellow transparent solid obtained by the esterification of gum rosin and maleic anhydride using glycerol or pentaerythritol. This product is soluble in coal tars, esters, and turpentine oil, insoluble in alcoholic solvents, partially soluble in petroleum solvents, and soluble well in plant oils. It has the advantages of stable color, resistance to yellowing, good heat resistance, and adhesion.

Flytac 188

Chemical Family:Hydrocarbon Derivatives
Functions:Tackifier
End Uses:Hot Melt Adhesive, Solventborne Adhesive, Pressure Sensitive Adhesive
Compatible Polymers & Resins:Polyisobutylene Polymers (PIB), Styrene Butadiene Styrene (SBS), Natural Rubbers (NR), Ethylene Vinyl Acetate (EVA), Styrene Butadiene Rubber (SBR), Styrene Isoprene Styrene (SIS), Styrene Ethylene Butylene Styrene (SEBS)
Features:Improves Adhesion, Heat Resistance, Improved Cohesion
Synonyms:Petrosin

Flytac 188 is a light yellow aliphatic hydrocarbon resin. It is polymerized by high-purity 1.3-pentadiene and designed as a tackifier in hot melt/pressure-sensitive adhesives. This product has good heat resistance, light odor, and good compatibility with polymers like SBS, SIS, SEBS, EVA, SBR, NR, and polyisobutylene.

Flytac 191 (Hydrogenated C5 Resin)

Functions:Thickener, Tackifier, Rheology Modifier, Tackifier
Chemical Family:Hydrocarbon Derivatives
Compatible Polymers & Resins:Amorphous Polyalphaolefin (APAO), Polypropylenes (PP), Styrene Isoprene Styrene (SIS)
Features:Good Compatibility, Low Odor, Thermal Resistance, Good Thermal Stability
Synonyms:Petrosin

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Knowde Brand Summary

Food & Nutrition Formulations

Agriculture & Feed

Sustainable Cosmetic Ingredients

Agrochemicals

Flytac

Guangzhou Flying Dragon Chemical Ltd. Brand

Knowde Brand Summary

Identification

Features & Benefits

Applications & Uses