Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- General Processing Recommendations
Green Dot’s Terratek® FX1504 resin needs to be dried before processing. If resin is in a sealed box, dry resin at 90°F to 100°F for 2 to 3 hours. If resin is in an open box, dry resin at 100°F to 120°F for 4 to 5 hours.
For best molding results, larger gates and runners are recommended. The injection pressure required to fill the mold is much higher than typical injection molding grade plastics. Typical injection molding temperatures are listed below, these are only a guide and may need to be changed based on the particular application :
Rear 300°F to 330°F Middle 300°F to 330°F Front 300°F to 330°F Nozzle 300°F to 330°F Processing at temperatures above 350° F and in combination with high shear conditions such as high injection speed may result in thermal degradation of this resin.
Properties
- Typical Properties
Value Units Test Method / Conditions Specific Gravity 1.23 - ASTM D792 Izod Impact 6.06 ft lb/in ASTM D256 Tensile Strength (Ultimate) 1873 psi ASTM D638 Tensile Modulus 16097 psi ASTM D638 Elongation 400 % ASTM D790 Flexural Strength 762 psi ASTM D790 Flexural Modulus 16097 psi ASTM D790 Melt Index (190°C, 2.06kg) 15 g/10min ASTM D1238 Shrinkage 0.0095 in/in -
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging
Terratek® FX1504 resin is typically packaged in a sealed plastic-lined fiber drum of 250 lbs.
Storage & Handling
- Storing
The product should be stored in a cool, dry, and sanitary area to achieve maximum stability.