Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Properties
- High tensile strength
- High mechanical strength
- High rigidity (also at low temperature)
- High chemical resistance
- Very low water absorption
- Good friction and wear and tear values
- Self-extinguishing
- High UV-resistance
- Toxic fumes when burned
- Relatively high coefficient of thermal expansion
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Gaskets
- Pump and sealing bodies
- Rotation disks
- Valves
- Check valves
- Extraction centrifuges
- Fittings
- Slide rails
- Gear wheels, guide rails and wheels
- Adapters
- Components in the electrical industry and medical technology
- Dosing stations, filter frames, flanges and sleeves
- Roller conveyors, adjusting clamps
Properties
- Color
- Flame Rating
- Physical Form
- Form and Condition
- Rods. Sheets / Solid
- Odor
- Odorless
- Insoluble in
- Water
- Mechanical Properties
Value Units Test Method / Conditions Tensile Strength at Yield 58 MPa ISO 527 Elongation at Yield (S) 17 % ISO 527 Tensile Strength at Break 46 MPa ISO 527 Elongation at Break (R) 29 % ISO 527 Impact Strength (an) No break kJ/m2 ISO 179 Notch impact Strength (ak) 12 kJ/m2 ISO 179 Ball Indentation (Rockwell Hardness) 120 MPa ISO 2039 Hardness 80 Shore D ISO 868 Flexural Strength (B 3,5 %) 80 MPa ISO 178 Modulus of elasticity (Et) 2125 MPa ISO 527 - Physical Properties
Value Units Test Method / Conditions Specific Gravity 1.78 - ISO 1183 Water Absorption 0.04 % ISO 62 Humidity Absorption 0.01 % ISO 62 Maximum Permissible Service Temperature 150 °C UL746B Lower Permissible Service Temperature -30 °C UL746B - Thermal Properties
Value Units Test Method / Conditions Vicat Softening Point (VST/B/50) 138 °C ISO 306 Vicat Softening Point (VST/A/50) 160 °C ISO 306 Heat Deflection Temperature (HDT/B) 145 °C ISO 75 Coefficient of Linear Thermal Expansion 0.47 K-1.10-4 ISO 11359 Coefficient of Linear Thermal Expansion 1.3 K-1.10-4 ISO 11359 Heat Deflection Temperature (HDT/A) 104 °C ISO 75 Thermal Conductivity (20°C) 0.13 W/(m.K) ISO 22007-4 Glass Transition Temperature (Tg) -40 °C ISO 3146 Melting Temperature (Tm) 171 °C ISO 3146 - Typical Properties
Value Units Test Method / Conditions Density 1.78 g/cm³ - Melting Temperature 165 - 175 °C - Thermal Decomposition min. 315 °C - - Electrical Properties
Value Units Test Method / Conditions Volume Resistivity min. 10^10 Ω.cm IEC 60093 Surface Resistivity (Ro) min. 10^12 Ω IEC 60093 Dielectric Constant (1MHz) 7 - IEC 60250 Dielectric Loss Factor (1 MHz) 0.24 - IEC 60250 Dielectric Strength 27 kV/mm IEC 60243-1 Tracking Resistance CTI 600 V IEC 60112 - Additional Information
Value Units Test Method / Conditions Bondability Limited - - Physiological Indifference (EEC) Yes - - Physiological Indifference (FDA) Yes - - Flammability V-0 - UL 94 Limiting Oxygen Index (LOI, 9) 44 % ASTM D2863 UV Stabilisation (6, 9) Yes - -
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Fire-fighting Measures
Suitable extinguishing agents
Water, foam, dry chemical, carbon dioxide (CO2).
Potential combustion products
Carbon dioxide (CO2), carbon monoxide (CO). Formation of further decomposition and oxidation products depend upon the fire conditions. Under special fire conditions traces of other toxic substances are possible.
Special protective equipment
Wear a self-contained breathing apparatus. If exposed to combustion fumes bring the victim into fresh air.
Further information
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations..
Safety & Health
- Safety Measures
The general industrial safety measures should be considered. A thermal damage during machining should be avoided.
Storage & Handling
- Machining
The product can be machined with standard machinery and tools. Before machining the product should be stored at room temperature 24 h. Evacuate swarf to prevent slipping or tripping. Observe the maximum allowable concentration of dust and formaldehyd levels on the working area which apply in your country. Wear safety goggles during machining. General dust limit value: Respirable dust (6 mg/m3); Inhalable dust (10 mg/m3 ).
- Storage
The products shall be stored indoor to keep away from any source of degradation such as sunlight, UV-jets, ionizing radiation, chemicals.