Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- INCI Name
- Cosmetic Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Benefit Claims
Applications & Uses
- Markets
- Applications
- Product Applications
Galguard Phenoxyethanol Ultra is used for a wide range of applications including:
- As a preservative in personal care formulations.
- As a synergistic component in broad spectrum anti - bacterial agents.
- As a perfume fixative.
Properties
- Physical Form
- Appearance
- Clear, low viscous liquid, colourless
- Odor
- Characteristic
- Specifications
Value Units Test Method / Conditions Color ( 5 ¼ ” cell, on Y+R) max. 0.5 Lovibond - Color max. 10 APHA - pH (1 % aqueous solution) 5.5 - 7.0 - - Purity min. 99.95 % Gas Chromatography Moisture Content max. 0.1 % by mass Karl Fischer Specific Gravity (at 20°C) 1.105 - 1.110 - - Refractive Index (at 20°C) 1.537 - 1.539 - - Free Phenol max. 500 ppb - Chemical Formula C₆H₅O-CH₂CH₂OH - -
Safety & Health
- Safety Information
Spill should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with skin, eyes and clothing. In case of contact with eyes, rinse with plenty of water and seek adequate and timely medical attention
Packaging & Availability
- Packaging Type
- Packaging Information
Galguard Phenoxyethanol Ultra is available in 235 liters HMHDPE carboys. Total of 80 carboys i.e. 20 MT (250 kg per carboy) can be shipped palletized or non - palletized in 20 ft. full container load. It is available in 35 liters HMHDPE carboys. Total of 480 carboys i.e. 16.8 MT can be shipped palletized or non - palletized in 20 ft. full container load. It is also available in 25 liters HMHDPE carboys. Total of 640 carboys i.e. 16 MT can be shipped palletized or non - palletized in 20 ft. full container load. It can be supplied in IBC of 1 / 1.1 MT capacity. Total of 18 IBC i.e. 18 / 19.8 MT can be shipped in 20 ft. full container load. It can also be shipped in ISO containers
Storage & Handling
- Shelf Life
- 2.5 Years
- Storage & Handling Information
- Store the material in a clean, dry place at 20 - 40°C away from direct heat and sunlight.
- Keep the container tightly closed after use.
- Since product is hygroscopic in nature, moisture content may increase if exposed to atmosphere, but does not affect preservation properties. Once carboy / IBC is opened, consume the product within a week.
- Product solidifies, if stored below 14°C for prolonged time. If solidifies, it is recommended to heat ISO containers with hot water or steam with 1.0 - 1.5 kg / cm² pressure through jacket to bring the temperature of product to 30 - 40°C.
- If the product becomes frozen in IBC / HMHDPE carboys then keep the same in hot room of 30 - 40°C (avoid direct heating).
- In original sealed condition, when stored as suggested, shelf life of the product is at least 2.5 years.
- During storage, stacking should be maximum 1+1 for IBC / HMHDPE carboys (palletized as well as non - palletized).