Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- INCI Name
- Base Chemicals Functions
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Benefit Claims
- Labeling Claims
- HII Features
- Product Attributes
Galaxy MW 253 is a non-ionic surface active agent derived from natural fatty alcohols.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Application Format
- Base Chemicals End Uses
- Bath & Shower Applications
- Hair Care Applications
- Home Care Applications
- I&I Cleaning Applications
- Product Applications
Galaxy MW 253 is used as an intermediate for synthesis of anionic surfactants like alkyl ether sulfates. It can also be used as a viscosity booster in personal care preparations like shampoos, foam baths and bubble baths. It is used as wetting agent in laundry care e.g. Liquid Laundry, Metal surface cleaners.
Properties
- Physical Form
- Appearance
- Clear low viscous liquid, colourless to pale yellow
- Odor
- Characteristic
- Specifications
Value Units Test Method / Conditions Color (at 35°C) max. 25.0 APHA - pH (1% in distilled water) 6.0 - 8.5 - - Moisture Content max. 0.3 % by mass - Hydroxyl Value 165 - 175 mg KOH/g - Solidification Point 2 - 6 °C - Specific Gravity (at 20°C) 0.924 - 0.935 - - Polyethylene Glycol max. 1.0 % by mass - Chemical Formula RO(CH₂CH₂O)nH - -
Safety & Health
- Safety Information
Spill should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention, if necessary.
Packaging & Availability
- Packaging Type
- Packaging Information
Galaxy MW 253 is available in 235 litres HMHDPE carboys. Total of 80 carboys i.e. 16.8 MT (210 kg per carboy) can be shipped either palletized or non - palletized in 20 ft. full container load. It can be supplied in IBC (1 MT). Total of 18 IBC i.e. 15.3 MT (850 kg per IBC) can be shipped in 20 ft. full container load. 22.5 MT of Galaxy MW 253 can also be supplied in 25-26 MT ISO tank. In India, 20-39 MT of Galaxy MW 253 can be supplied in 20-40 MT Road Tanker.
Storage & Handling
- Shelf Life
- 2 Years
- Storage & Handling Information
- Store the material in a clean, dry place at 30 - 40°C away from direct heat, sunlight and moisture.
- Keep the container tightly closed after use, as the product is hygroscopic.
- Once carboy / drum / IBC is opened, consume the product within a week.
- When taken in ISO container, it is recommended that material be consumed within one month’s time after unloading in storage tank.
- In original sealed container, when stored as suggested, shelf life of the product is at least two years.
- If the material is stored below 10°C, then it may become hazy or semi - solid.
- If the product becomes frozen in IBC / HMHDPE carboys / drums, then keep the same in hot room of 50°C for around 2 days.
- It is recommended to heat the ISO tanks with hot water jacket of 70 - 80°C (4 - 8 hours) or low pressure steam (< 2 kgs / cm2 ) to bring the temperature of the product to 30 - 40°C.
- Avoid direct heating.
- Heating time may vary.
- Once it is in molten stage, mix it properly to make it uniform before use.
- If the material is not melted properly / not uniform, there is possibility of improper sampling.
- Avoid part quantity use.
- It can also be stored in a clean and dry SS storage tank.
- During storage, HMHDPE carboys (palletized / non - palletized) / IBC should not be stacked one above the other