Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- INCI Name
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Benefit Claims
- HII Features
- Product Attributes
Galaxy LES is an anionic surfactant. It is water soluble. It has excellent foaming power and detergency property. It is also a very good emulsifier. It can be used with other anionic, non-ionic or amphoteric surfactants. However, due to its anionic character, it should not be used with cationic components like cationic surfactants, cationic dyes, etc.
Applications & Uses
- Markets
- Applications
- Application Format
- Bath & Shower Applications
- Hair Care Applications
- Home Care Applications
- Product Applications
Galaxy LES is used for a wide range of applications such as:
- In bathing bars, shampoos, foam baths, body wash, liquid soap and shower gels as a basic surfactant and foaming agent
- In liquid detergents and dish washing formulations for detergency and foaming
- In fire fighting foams
Properties
- Soluble In
- Appearance
- Clear, low viscous liquid, colourless to pale yellow
- Odor
- Characteristic
- Soluble in
- Water
- Microbiological Values
Value Units Test Method / Conditions Total Viable Count max. 10 cfu/ml - - Specifications
Value Units Test Method / Conditions pH (10 % aqueous solution) 6.0 - 7.5 - - Active Matter (Mol.wt. 384) 27 - 29 % by mass - Non-Decomposable Organic Matter max. 1.0 % by mass - Sulfate (as Na₂SO₄) max. 1.0 % by mass - Chloride (as NaCl) max. 1.0 % by mass - Viscosity (at 28°C, #2, 12 rpm) max. 1500 cps LVT Cloud Point max. 0 °C - Clear Point max. 5 °C - Transmittance (at 420 nm) min. 85 % - 1,4-Dioxane content (on 100% A.M) max. 30 ppm - - Heavy Metals
Value Units Test Method / Conditions Iron Content max. 5 ppm - Arsenic Content max. 2 ppm - Total Heavy Metals (as Pb) max. 5 ppm -
Safety & Health
- Safety Information
Spill should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes and skin, rinse immediately with plenty of water and seek medical advice, if necessary
Packaging & Availability
- Packaging Type
- Packaging Information
Galaxy LES is available in 235 litres HMHDPE carboys. Total of 80 carboys i.e. 18.8 MT can be shipped palletized or non - palletized in 20 ft. full container load. It is available in 50 litres HMHDPE carboys. Total of 360 carboys i.e. 18 MT can be shipped palletized or non - palletized in 20 ft. full container load. It can be supplied in IBC of 1 MT capacity. 18 IBC i.e. 18 MT can be shipped in 20 ft. full container load. It can also be supplied in ISO tanks (23 MT) and flexi bags (23 MT). In India, it can be supplied in jacketed SS tankers (20 MT)
Storage & Handling
- Shelf Life
- 1 Year
- Storage and Shelf Life Conditions
- Store the material in a clean, dry place at 15 - 35°C away from direct heat and sunlight. Ensure proper housekeeping and personal hygiene.
- Keep containers tightly closed. In the original sealed condition, when stored as suggested, shelf life of the product is at least one year.
- Once the carboy / IBC is opened, ensure airtight closure after usage and use the product within a week. When taken in ISO container / tankers / flexi bags, it is recommended to transfer the material from ISO containers / tankers / flexi bags to sanitized SS storage tank with hot water jacket and also recommended that material be consumed within one month’s time, after unloading in storage tank.
- Slight pH drop is possible over prolonged storage. In case of drop in pH, it is fairly safe to use the material as long as the pH > 5.0. On prolonged storage below 5°C, if the product becomes non-flowable, then it is recommended to heat the jacketed ISO containers / tankers or flexi bags with hot water of temperature 55 - 60°C for two hours.
- Do not apply direct steam. If the product becomes frozen in IBC / HMHDPE carboys then keep the same in hot room at 40°C.
- During storage, carboys (palletized / non- palletized) should not be stacked one above the other and for IBC, stacking should be maximum 1+1