Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- INCI Name
- Cosmetic Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Benefit Claims
Applications & Uses
- Markets
- Applications
- Application Format
- Baby Care Applications
- Bath & Shower Applications
- Hair Care Applications
- Product Applications
Galaxy ESS is a mild anionic surfactant used across a wide array of personal care formulations, especially in mild hair shampoos, baby shampoos, foam baths and shower gels. Typically it is used along with other anionic surfactants like Sodium Laureth Sulfate wherein they reduce the irritancy of the formulation.
Properties
- Physical Form
- Appearance
- Clear, low viscous liquid, colourless to pale yellow
- Odor
- Characteristic
- Specifications
Value Units Test Method / Conditions Color (5 ¼” cell, on Y+R) max. 4 Lovibond - pH (10 % aqueous solution) 5.0 - 7.0 - - Sulfate (as Na₂SO₃) max. 0.3 % by mass - Viscosity (at 28°C) max. 200 cps - Solids Content (at 105°C, 2 hrs) 38 - 40 % by mass - Microbial Count (TVC) max. 10 cfu/ml - Chemical Formula R-O-(CH₂CH₂O)₃-COCH(SO₃Na)CH₂COONa - -
Safety & Health
- Safety Information
Spills should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes and skin, seek medical attention, if necessary.
Packaging & Availability
- Packaging Type
- Packaging Information
Galaxy ESS is available in 250 liters HMHDPE carboys. Total of 80 carboys i.e. 20 MT can be shipped either palletized or non - palletized in a 20 ft. full container load. It can also be supplied in 50 liters HMHDPE carboys. Total of 360 carboys i.e. 18 MT can be shipped either palletized or non - palletized in a 20 ft. full container load. It can be supplied in IBC of 1 MT capacity. Total of 18 IBC i.e. 18 MT can be shipped in 20 ft. full container load.
Storage & Handling
- Shelf Life
- 1 year
- Storage & Handling Information
- Store the material in a clean and dry place at 20 - 30°C away from direct heat and sunlight.
- Product may become hazy and may show some precipitation when chilled ≤ 5°C. Gentle warming by keeping the HMHDPE carboys/IBC in hot room (not exceeding 35°C) with mixing should bring back the material to its original state.
- Avoid direct heating, mix it properly to make it uniform before use.
- On prolonged storage, product may undergo hydrolysis. The rate of hydrolysis depends on the temperature and pH. At temperatures above 30°C, hydrolysis may start and above 40°C, it is rapid. pH outside range of 5.0 - 7.0 will also accelerate the rate of hydrolysis.
- Once the HMHDPE Carboy/IBC is opened, ensure airtight closure after usage and use the product within a week.
- In the original sealed condition, when stored as suggested, the shelf life of the product is one year.
- During storage, stacking of HMHDPE carboys (palletized) should be 1+1 and Non-palletized HMHDPE carboys should not be stacked one above the other. For IBC stacking should be maximum 1+1