Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Properties
- Excellent mechanical properties
- Excellent chemical resistance.
- Exceptional temperature resistance
- Excellent electrical insulating properties
- High limiting oxygen index
- Reduced deformation under load
- Higher transparency
- Reduced friction & wear; Low friction behavior
- Suitable for food contact
- Improved weldability
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Typical Application
Fluteck™ P1550 Modified PTFE Premium Grade increases the already wide range of applications of virgin PTFE. Lower permeability to gasses and deformation under load, greater elastic recover and mechanical properties and better weldability open up entirely new possibilities of applications in several fields such as Chemical, Eletrical and Electronic, Petrochemical, Automotive, Mechanical, Medical, Aeronautics, Semiconductor and Food industry.
Fluteck™ P1550 Modified PTFE Premium Grade is ideal for use in applications that required high standard of safety and reliability, such as plant and machinery for high purity chemicals, semiconductor industry, analytical laboratories of food indusry
Properties
- Color
- Physical Properties
Value Units Test Method / Conditions Specific Gravity 2.130 - 2.180 g/cm³ ASTM D792 Water Absorption 0.01 % ASTM D570 Flamability V - 0 - UL 94 - Mechanical Properties
Value Units Test Method / Conditions Tensile Strength min. 30 MPa ASTM D4894 Elongation min. 450 % ASTM D4894 Hardness min. 54 Shore D ASTM D2240 Ball Hardness min. 23 MPa ASTM D785 Compression Strength (1% Deformation) min. 4 MPa ASTM D695 Deformation Under Load (140 kg/cm², 24hrs, 23°C) 9 - 12 % ASTM D621 Permanent Deformation (min. 24 Hrs, Relaxation 23°C) 45 - 6 % ASTM D621 Coefficient of Static Friction 0.08 - 0.10 - ASTM D1894 Coefficient of Dynamic Friction 0.06 - 0.08 - ASTM D1894 Wear Factor 2.9 - ASTM D3702 Wear Coefficient 20000 - 25000 kgmh - - Thermal Properties
Value Units Test Method / Conditions Thermal Conductivity 0.24 W/mK ASTM C177 Coefficient of Linear Thermal Expansion (25°C - 100°C) 12 - 14 10⁵/°C ASTM D696 Dielectric Strength min. 50 kV/mm ASTM D149 Volume Resistivity 10¹⁸ Ohm-cm ASTM D257 Surface Resistivity 10 Ohm ASTM D257
Regulatory & Compliance
- Certifications & Compliance
- Statement on suitability for contact with foodstuff
FDA Approved US Regulation
- Code of Federal regulation 21 CFR Ch.1; section 177.1550 Perfluorocarbon Resins of the Food and Drug Administration/US. EU Regulation
- EU 1935/2004 - 10/2011 on plastic materials and articles to come in contact with food..
Technical Details & Test Data
- Typical properties
Fluteck™ P1550 is a Modified PTFE Premium Grade preferred for parts and components requiring very good mechanical properties. Fluteck™ P1550 offers an excellent combination of properties typical of the fluoropolymer resins:
- Service Temperature : Fluteck™ P1550 offers excellent resistance to continuous service temperatures – working conditions from -100°C up to 250°C and, for limited periods, even to higher temperatures; Product’s low temperature resistance allows satisfactory performance down to –200°C.
- Chemical resistance : Fluteck™P1550 offers high inertness towards nearly all known chemicals. Only attacked elemental alkali metals, chlorine trifluoride and elemental fluorine at high temperature and pressures might affect properties.
- Solvents resistance : Fluteck™ P1550 offers insoluble properties in all solvents up to temperatures as high as 300°C. Certain highly fluorinated oils only swell and dissolve PTFE at temperatures close to the crystalline melting point
Storage & Handling
- Storage & Handling
Futeck™ P1550 Modified PTFE Premium Grade can be stored for a long period of life and is exceptionally resistant to aging and weather conditions up to 10 years. Specific aging tests carried out on sample exposed to aging and atmospheric conditions, showed no changes in weight and volume. In case of semi-finished products, before processing or before the machining, it is advisable to store the material for 24 hours in the production area, preferable in a clean and dry place at a temperature of less 25°C, preferably between 21-25°C. This is very important when room temperature is low; in such cases the material should be conditioned up to 72 hours in the production area in the recommended temperature range.