Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Fluoro-Plastics Skived PTFE - VS3/32X12A

Skived PTFE - VS3/32X12A is ideal as a slide surface, for chute liners, other kinds of liners, or for cutting or stamping into gaskets (asbestos substitute) and diaphragms, including complex stamped gasket configurations. It comes in sheets from 60 inches by 60 inches square to rolls 60 inches wide. Material may be ordered in long lengths as individual sheets. The material can be wound on a three-inch cardboard or PVC core. The material may be ordered etched for bonding on one or both sides for an additional charge (both Sodium Ammonia and Sodium Naphthalene etching are offered).

Polymer Name: Polytetrafluoroethylene (PTFE)

Physical Form: Sheets

Color: White

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Fluoropolymers
Polymer Name
Polytetrafluoroethylene (PTFE)
Material Type
Standard PTFE
Technologies
Plastics
Product Families
Plastics — Parts, Shapes & Films

Applications & Uses

Markets
Electrical & Electronics,
Food & Nutrition,
Healthcare & Pharma,
Industrial
Applications
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Healthcare & Pharma — Medical
Laboratory & Diagnostics
Electrical & Electronics — Parts & Components
Semiconductor Manufacturing
Food & Nutrition — Processing & Packaging
Food & Beverage Manufacturing
Plastics & Elastomers End Uses
Bearings,
Gaskets,
Pumps,
Washer

Properties

Color
White
Physical Form
Sheets
Typical Properties
ValueUnitsTest Method / Conditions
Thickness3/32"-
Width12.0"-
Length12.0"-
Specification SheetAMS 3652 / MIL-P-22241--
Tensile Strengthmin. 1500psi-
Elongation at Break±2000%-
Dielectric Strength (Breakdown Voltage)500.0Volts/mil-
Tolerance

Skived sheets can be made in any thickness from 15 mils up to .250 inches. Fluoro-Plastics technology makes it possible to make in-between sizes. Thickness tolerances range from .0005 for sizes from .002" thick to .005" thick up to .003" tolerance for material that is over .060" thick.

Regulatory & Compliance

Regulatory & Compliance

All material conforms to ASTM D3308.

Packaging & Availability

Availability

It comes in sheets from 60 inches by 60 inches square to rolls 60 inches wide. Standard sizes are 48 inches square, twelve inches square, twenty-four inches square, thirty-six inches square, and rolls one, two, three and four feet wide are available for clicker press fabricators. Material may be ordered in long lengths as individual sheets.