Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Fluids & Lubricants Features
- Product Highlights
It is a kind of low-ash, multi-function and high-effect gasoline engine oil complex agent for energy saving and emission reduction and is designed in accordance with ILSAC energy saving and emission reduction standards, ACEA2010C-10 and 2010A/B-10 specifications as well as API premium gasoline engine oil standards. The introduction of rare earth and boron greatly improves the extreme pressure, wear resistance, friction reduction, high-temperature oxidation and corrosion resistance of oil, the use of ZDDP can be avoided or reduced, to significantly reduce the content of sulfur, phosphorus and ash, extend the service life of three-way catalytic converters and oxygen sensors, and reduce the emissions of CO, HC, SO2 and NOx. Borides are high-energy fuels and can be used for promoting catalytic combustion, energy saving and emission reduction.
Applications & Uses
- Markets
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Scope of Application
- The product is applicable for preparing a series premium gasoline engine oil meeting ILSAC and API standards by using Classes API-I, II, III and IV base oil.
- Recommended Dosage: API-SJ/GF-25.4%,SL/GF-36.6%,SM/GF-47.6% and SN/GF-58.5%
Properties
- Specifications
Value Units Test Method / Conditions Density (20°C) 950 - 1050 kg/m³ GB/T1885 Kinematic Viscosity (100°C) 60 - 70 mm²/s GB/T265 Flash Point (Opening) min. 180 °C GB/T267 Pour Point max. -10 °C GB/T3535 Boron Content 0.3 - 0.5 % SH/T0227 Phosphorus Content 0.8 - 1.2 % SH/T0296 Sulfur Content 2 - 3.5 % SH/T0303 Total Base Number min. 80 mgKOH/g SH/T0251
Storage & Handling
- Attentions for Storage and Use
Packaging, marking, transportation, storage and acceptance of delivery are performed as per SH/T0164. 200Kg packaging with galvanized iron bucket shall be stored in dry and ventilated storehouse below 45°C; Blending temperature should not exceed 75°C. The product is non-flammable, non-explosive, non-corrosive. General chemical prevention measures shall be taken in feeding and using process to avoid contacting with skin. Once touching, wash out with soap water.