Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Foam Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Ready-to-Use Product Features
- Product Highlights
FIBRANxps FABRIC conforms to the European Regulation 305/2011 (CPR), which replaced the European Directive 89/106/ΕEC, and is produced according to the European Standards EN 13164(Thermal insulation products for buildings - Factory made products of extruded polystyrene foam(XPS) and EN 13172.
It is certified by international independent Notified Bodies and carries CE marking. Extruded polystyrene insulation boards FIBRANxps FABRIC are produced with the extrusion of polystyrene foam and are characterized by very dense closed micro-cell structure.
The minuscule, thin, rigid and closed polystyrene cells contain enclosed inert gas and air, such that they achieve very high insulating capacity, whilst also remaining dry in environments with increased moisture (basements, inverted roofs, indoor swimming pools, etc.).
It is the only insulating material with especially high mechanical strength, water-resistant yet with balanced water vapor diffusion resistance.
- Advantages
- Excellent thermal insulation
- High mechanical compressive and tensile strength
- Water-resistant and non-hygroscopic
- Light and easy-to-handle
- Resistant to vibrations
- Fully recyclable (100%)
- Friendly to the environment and the end user
- 100% CFC-free and HCFC-free
- Zero Ozone Depletion Potential (ODP = 0)
- Zero Global Warming Potential (GWP = 0)
Applications & Uses
- Markets
- Applications
- Product End Uses
- Applications
The rigid extruded polystyrene boards FIBRANxps FABRIC are suitable for application in all types of building constructions, even in wet environments and applications with increased compressive and tensile loads.
- Insulation of industrially manufactured laminated sandwich panels
- Insulation of window frames
- Insulation in adehered drywall systems
- Application and Protection
During the installation of FIBRANxps boards, all construction requirements for the correct application of the insulation should be considered. FIBRANxps boards must be applied on flat and clean surfaces. They may easily be cut with a sharp standing knife or hot wire. The edges of FIBRANxps boards are formed with «I» straight, «L» shiplap or «D» tongue-and-groove profiles. When applying the boards in a single layer, boards with «L» or «D» edge profiles are recommended in order to avoid thermal bridges that may occur at the joints.
Naked flame torches or similar appliances should not be used during the application of extruded polystyrene FIBRANxps boards. Wherever FIBRANxps boards are to be applied over basement waterproofing membranes, do not use mechanical anchors but FIBRANstick auto adhesive tapes. When applying FIBRANxps boards on large surfaces, especially on warm flat roofs, it is necessary to construct expansion joints with the use of stone wool and elastic sealing mastic.
When cutting FIBRANxps Extruded Polystyrene boards with hot wire, applicators should take all necessary self-protection measures (working suit, gloves, goggles).
Properties
- Color
- Physical Form
- Surface
- Smooth surface
- Edges Profile Lengthwise / Widthwise
- I (straight) / I ( straight)
- Typical Properties
Value Units Test Method / Conditions Dimensions 2100 x 600, 2100 x 900 mm EN 822 Nominal Thickness (dN) 18 - 90 mm EN 823 Water Vapor Diffusion Resistance Factor (MU) 50 - EN 12086 Compressive Stress (CS, 10% Thickness Deformation) 150 - 300 kPa EN 826 Maximum Design Load max. 130 KN/m² EN 13164 Declared Thermal Conductivity Coefficient (λD, 10°C,> 60mm, After 25 Years) 0.034 W/(mK) EN 12667 Long-term Water Absorption By Total Immersion WL(T) max. 1.5 Vol. % EN 12087 Declared Thermal Conductivity Coefficient (λD, 10°C,≤ 60mm, After 25 Years) 0.033 W/(mK) EN 13164 Water Absorption by Diffusion WD(V) max. 3 Vol. % EN 12088 Thickness Tolerance (±1 mm < 50mm ,±1 mm ≥ 50mm) T3 Class EN 13164 Tensile Strength Perpendicular to Faces (TR) min. 400 kPa - Operating Temperature -125 °C - Fire Classification E Class EN 13501-1
Regulatory & Compliance
- Certifications & Compliance
- Certifications
All FIBRANxps extruded polystyrene products meet the QUALITY and SAFETY requirements of European Standards.
The quality of FIBRANxps products is assured in accordance with ΕΝ 13164 and ΕΝ 13172 standards. These standards establish the type and frequency of measurements executed both by independent and recognized institutions, as well as by FIBRAN laboratories.
- CE Certification
- ISO 9001:2015 Certification
- ISO 14001:2015 Certification
Technical Details & Test Data
- Thermal Resistance
Nominal Thickness dN mm 18 20 21 50 80 90 EN 823 Thermal Resistance R m2K/W 0.5 0.6 0.6 1.5 2.35 2.6 EN 13164
Packaging & Availability
- Packaging
Thickness [mm] Width [mm] Length [mm] Boards / package [pc] Quantity/ package [m²]
18 900 2100 23 43.47 18 600 2100 23 28.98 20 900 2100 20 35.91 20 600 2100 20 25.2 21 900 2100 19 35.91 21 600 2100 20 25.2 30 600 2100 14 17.64 50 900 2100 8 15.12 50 600 2100 8 10.08 80 600 2100 5 6.3 90 600 2100 4 5.04
Storage & Handling
- Handling and Storage
FIBRANxps thermal insulation boards are resistant to cold, rain and snow, but not to long-term exposure to ultraviolet radiation. Therefore, the products’ packaging should only be removed just before their installation. In case the original packaging film is torn, the boards must be protected from direct sunlight. Although FIBRANxps boards are among the toughest materials on the market, contact with sharp objects may damage or deform them.
FIBRANxps boards may be used at maximum temperature of 75°C. However, if they are stored outdoors and exposed to direct sunlight or wrapped in dark packaging material, deformation of the boards may occur due to the high temperatures that develop.
FIBRANxps boards must not come into contact with solvents such as petrol, tar and formic acid, or with gasses such as methane, ethane, propane and butane. Prior to applying a cleaning product on the boards’ surface, it is recommended to first test the material’s resistance to the particular cleaning agent. Please consult our Technical Department, if in doubt.
FIBRANxps boards are moderately resistant to substances such as mineral and food oils, paraffin, phenol and fats; this means that long-term exposure to these substances may affect their surface appearance or structure. FIBRANxps boards are highly resistant to water-soluble bitumen products, lime, cement, lime plaster, seawater, chlorines, most acids, inorganic gasses, alcohol and silicon. In case of doubt, a preliminary test is recommended.