Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
Properties
- Color
- Flame Rating
- Flame Rating
- IEC 60695-11-10 HB
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus (at 23°C) 8250 MPa ISO 527 Stress at break 175 MPa ISO 527 Izod Impact Notched (at -30°C) 12 kJ/m2 ISO 180/1A Tensile Modulus 9500 MPa ISO 527-2/1A/1 Izod Impact Notched (at 23°C) 16 kJ/m2 ISO 180/1A Izod Impact Un Notched (-30°C) 80 kJ/m2 ISO 180/1U Strain at break 3.5 % ISO 527 Izod Impact Un Notched (at 23°C) 95 kJ/m2 ISO 180/1U Strain at Break (at 23 °C) 3.5 % ISO 527 Stress at Break (at 23 °C) 175 MPa ISO 527 Tensile Modulus (at 23°C) 9500 MPa ISO 527 Izod notched impact strength, +23° 16 kJ/m2 ISO 180/1A Izod notched impact strength 12 kJ/m2 ISO 180/1A Izod impact strength, +23° 95 kJ/m2 ISO 180/1U Temperature -30 °C - - Physical Properties
Value Units Test Method / Conditions Density 1360 kg/m3 ISO 1183 - Typical Properties
Value Units Test Method / Conditions Density 1.36 g/cm3 ISO 1183 Moisture Absorption (50% RH at 23°C) 2.1 % ISO 62 Moisture Content max. 0.2 % ISO 960 Molding Shrinkage (Normal) 1 % Eurotec Molding Shrinkage (Parallel) 0.2 % Eurotec - Thermal Properties
Value Units Test Method / Conditions Heat Deformation Temperature (0.45 MPa) 220 °C ISO 75 Temperature of deflection under load (0.45 Mpa) 220 °C ISO 75-1/-2 Temperature of deflection under load (1.80 Mpa) 210 °C ISO 75-1/-2 Heat Deformation Temperature (1.80 MPa) 210 °C ISO 75 Melting Temperature (10 K/min) 223 °C ISO 11357 Vicat Softening Temperature (50N) 215 °C ISO 306 Melting temperature (10°C/min) 223 °C ISO 11357-1/-3 Thickness tested 0.8 mm - Vicat softening temperature 215 °C ISO 306 Burning Behavior at 1.5 mm nominal thickness HB class IEC 60695-11-10 Burning Behavior at thickness HB class IEC 60695-11-10 - Other Properties
Value Units Test Method / Conditions Humidity absorption 2.1 % Sim. to ISO 62 Moisture Content 0.2 % - - Processing Parameters
Value Units Test Method / Conditions Back Pressure Low - - Drying 80 / 2 - 4 °C / hr - Feed Throat Temperature 60 - 80 °C - Hold Pressure 50 - 100 MPa - Injection Speed Fast - - Mold Temperature 70 - 110 °C - Processing Temperature 270 - 300 °C - - Electrical Properties and Flammability
Value Units Test Method / Conditions Flame Rating (0.75 mm) HB - UL94 Flame Rating (1.6 mm) HB - UL94 Surface Resistivity 10000000000000 Ohm IEC 60093 Volume Resistivity 1E+15 Ohm-cm IEC 60093