Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
Properties
- Color
- Flame Rating
- Flame Rating
- IEC 60695-11-10 HB
- Mechanical Properties
Value Units Test Method / Conditions Izod Impact Notched (at -30°C) 11 kJ/m2 ISO 180/1A Stress at break 185 MPa ISO 527 Izod Impact Notched (at 23°C) 13 kJ/m2 ISO 180/1A Tensile Modulus 10000 MPa ISO 527 Izod Impact Un Notched (-30°C) 70 kJ/m2 ISO 180/1U Izod Impact Un Notched (at 23°C) 80 kJ/m2 ISO 180/1U Strain at break 3 % ISO 527 Strain at Break (at 23 °C) 3 % ISO 527 Stress at Break (at 23 °C) 190 MPa ISO 527 Tensile Modulus (at 23°C) 10000 MPa ISO 527 Izod notched impact strength 11 kJ/m2 ISO 180/1A Izod notched impact strength, +23° 13 kJ/m2 ISO 180/1A Izod impact strength, +23° 80 kJ/m2 ISO 180/1U Temperature -30 °C - - Typical Properties
Value Units Test Method / Conditions Density 1.36 g/cm3 ISO 1183 Moisture Absorption (50% RH at 23°C) 0.2 % ISO 62 Moisture Content max. 0.08 % ISO 960 Molding Shrinkage (Normal) 1.1 % Eurotec Molding Shrinkage (Parallel) 0.3 % Eurotec - Thermal Properties
Value Units Test Method / Conditions Heat Deformation Temperature (0.45 MPa) 260 °C ISO 75 Temperature of deflection under load (1.80 Mpa) 255 °C ISO 75-1/-2 Temperature of deflection under load (0.45 Mpa) 260 °C ISO 75-1/-2 Heat Deformation Temperature (1.80 MPa) 255 °C ISO 75 Melting Temperature (10 K/min) 262 °C ISO 11357 Vicat Softening Temperature (50N) 255 °C ISO 306 Melting temperature (10°C/min) 262 °C ISO 11357-1/-3 Thickness tested 0.8 mm - Vicat softening temperature 255 °C ISO 306 Burning Behavior at 1.5 mm nominal thickness HB class IEC 60695-11-10 Burning Behavior at thickness HB class IEC 60695-11-10 - Processing Parameters
Value Units Test Method / Conditions Back Pressure Low - - Drying 80 / 2 - 4 °C / hr - Feed Throat Temperature 60 - 80 °C - Hold Pressure 50 - 100 MPa - Injection Speed Fast - - Mold Temperature 70 - 110 °C - Processing Temperature 270 - 300 °C - - Electrical Properties and Flammability
Value Units Test Method / Conditions Flame Rating (0.75 mm) HB - UL94 Flame Rating (1.6 mm) HB - UL94 Surface Resistivity 100000000000000 Ohm IEC 60093 Volume Resistivity 1E+16 Ohm-cm IEC 60093