Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Additive
- Mold Release
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
Filler/Reinforcement - Unfilled
ROHS Compliance - ROHS compliant
Features - Low Viscosity
Processing Method - Injection Molding Grade
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Physical Form
- Appearance
- Grey
- Physical Properties
Value Units Test Method / Conditions Specific Gravity 1.3 - ASTM D-792 Water Absorption (Saturation, 23°C) 0.5 % ISO 62 Water Absorption (Equilibrium, 23°C, 50%RH) 0.25 % ISO 62 - Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Yield) 55 MPa ASTM D-638 Tensile Strain (Break) min. 15 % ASTM D-638 IZOD Impact Strength (23°C , Notch) 60 J/m ASTM D-256A IZOD Impact Strength (23°C , Unnotch) NB J/m ASTM D-256A Flexural Strength 85 MPa ASTM D-790 - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (0.45 MPa Unannealed) 140 °C ASTM D-648 Heat Deflection Temperature (1.8 MPa Unannealed) 70 °C ASTM D-648 - Typical Properties
Value Units Test Method / Conditions Volume Resistivity 1E+ 14 Ohm-cm ASTM D 257 Drying Time (3 - 4 hour) 110 - 120 °C - Injection Molding Temperatures 100 – 120 °C - - Electrical Properties
Value Units Test Method / Conditions Comparative Tracking Index 550 V IEC 60112 - Flammability
Value Units Test Method / Conditions Flammability Classification (0.75mm) HB - -
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Product Safety
ESTOPLAST EP is thermally stable up to 280°C and does not give rise to hazardous material due to degradation or evolution of gasses and vapors. ESTOPLAST EP decomposes above 350°C and gives unsaturated hydrocarbons and smll quantity of aldehydes. For more information on safety, refer individual product MSDS. Available on request.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage
It should be pre-dried as per the guideline mentioned above prior to molding. The Standard packing size is 25kg. In order to prevent moisture pick up and contamination, supplied packaging should be kept closed and undamaged.