Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
Flexible epoxy potting compound with excellent impact resistance.
Applications & Uses
- Markets
- Applications
- Application Area
- Instruction for Use
Stir well the contents of each container every time before removing material. If the contents are hard or lumpy, warm to 80°C and mix thoroughly before removing material.
1. Weigh each 100 grams of PART-A to 12 grams of Hardener PART-B
2. Mix until uniform. Scrape the sides and bottom of container repeatedly during mixing.
3. Proceed with potting application. Vacuums degas and cure as recommended to achieve the desired properties.
4. Typical cured properties were determined using recommended cure schedule. Some difference in properties may occur with the alternate or other cure schedules.- Industrial Usage
Practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
Properties
- Color
- Flame Rating
- Typical Properties
Value Units Test Method / Conditions Mix Ratio by Weight 100/12 - - Compound Viscosity (at 25°C) 6000 - 8000 cPs - Mixed Viscocity (at 25°C) 4000 cPs - Pot Life (at 25°C, 100g) 5 - 6 hours - Recommended Cure (at 100°C) 1 - 2 hours - Alternate Cure (at 25°C) 24 - 48 hours - - Typical Cured Properties
Value Units Test Method / Conditions Specific Gravity 1.62 - - Hardness 85 Shore D - Linear Shrinkage 0.31 % - Water Absorption (24 hr at Room Temperature) 0.12 % - Thermal Conductivity 0.8 W/m °K - Glass Transition Temperature (Tg) 28 °C - Dielectric Strength 480 Volts/mil - Dielectric Constant (at 1 kHz) 4.8 - - Dissipation Factor (at 1 kHz) 0.14 - - Volume Resistivity 1x10^14 Ω-cm - Flammability (at 3 mm) V-O - UL-94
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Warning
Adequate ventilation of work place and ovens is essential. These materials may cause injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.
Packaging & Availability
- Available Packaging
2 parts Kit - Packaged in Gallon, and 5-Gallon size.