Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Epoplex® LS50

Epoplex® LS50 is a two-component, 100% solids epoxy coating material designed as a rapid setting highway marking coating that provides durability and corrosion and abrasion resistance. Epoplex® LS50 is formulated to provide a simple volumetric mixing ratio of two volumes of Component A to one volume of Component B.

Brand: Epoplex (6 products)

Product Type: 2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating

Compatible Substrates & Surfaces: Asphalt

Features: Abrasion Resistant, Corrosion Resistant, Fast Cure, Good Adhesion, Good UV Stability, High Durability, Low Viscosity

Application Method: Spray

Chemical Family: Epoxy & Epoxy Derivatives

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Epoxy & Epoxy Derivatives
Product Type
2K (2 component) Coating,
Epoxy Coating,
Solventless & High Solids Coating
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Paints & Coatings
Other Paints & Coatings

Features & Benefits

Ready-to-Use Product Features
Abrasion Resistant,
Corrosion Resistant,
Fast Cure,
Good Adhesion,
Good UV Stability,
High Durability,
Low Viscosity
Product Advantages

• 100% solids chemistry
• Low viscosity suitable for spray application
• Long-term abrasion and corrosion resistance
• Excellent bond strength assures good adhesion to a variety of substrates
• Protection against moisture penetration
• Special formulation chemistry for rapid set at a wide range of temperatures
• High ultraviolet light stability
• High reflective qualities

Applications & Uses

Markets
Building & Construction
Applications
Building & Construction — Infrastructure, Roads & Paving
Coatings & Markings
Application Method
Spray
Compatible Substrates & Surfaces
Asphalt
Applications

Epoplex® LS50 may be applied to both cementitious and asphalt highway surfaces as a long-lasting striping material for both edging and center line markings.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Percent Solids100.0%-
Epoxy Equivalent Weight300 +/- 50-ASTM D-1652, Method B
Total Amine Value475 +/- 50-ERF-25-68
Track Free Time ( 77°F/25°C )max. 10minutesASTM D-711
Adhesion (100% concrete failure)min. 300psi(ASTM D-7234 formerly ASTM D-4541
Hardness Minmin. 80Shore DASTM D-2240, Shore D
Abrasion Resistancemax. 80 mg weight loss-ASTM D-4060, formerly ASTM C-501
Tensile Strength6000.0psiASTM D-638
Compressive Strength12000.0psiASTM D-695
Theoretical Coverage 15 mils122.0sq.ftper gallon
Mixing Ratio2 Parts A to 1 Part B, by volume--
Chromaticity (Color)within coordinates-ASTM D-6628
Yellowness Indexing (before QUV )max. 8-ASTM E-313Max
Yellowness Indexing (after QUV)max. 20--
Titanium Dioxide (White) (Exceeds Type I,II,III & IV)18-25%ASTM D-476, Type V
Non-Lead Organic Yellow2022-05-10%-

Packaging & Availability

Packaging Type
Drums,
Totes (IBC)
Packaging

Component A: Base Resin and Pigmentation
Component B: Activator/Curing Agent
Both components are available in 55 gallon drums and 250 gallon returnable totes. 

Available In

Epoplex® LS50 is available in highway white, non-lead yellow, and black.

Storage & Handling

Storage Conditions

Store both components of Epoplex® LS50 in a dry area. Avoid excessive heat and do not freeze. The shelf life is two years in the original, unopened container.