Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Pipe Fittings Application Data
Details
Envalior is offering a portfolio for water management applications. EcoPaXX® PA410 is a 70% biobased alternative for pipe fittings. Xytron™ PPS would be a good alternative in case of even more demanding requirements.Benefits
- Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiff and tough) and its better surface appearance than PA66
- Stanyl® PA46 allows for more economical and reliable solutions than PES or PPSU also as a result of a very good creep resistance at elevated temperatures
- Xytron™ PPS can provide super hydrolysis.
- Panhandle Application Data
Details
Application requirements Stiffness at high temperature Long term heat resistance Dishwasher proof Food contact Good esthetics Thermal shock resistance Water cooled tooling capable & high productivity Material properties HDT-A > 290 to 320°C UL 94 HB rating Approved food contact regulation including EU 2011-10, FDABenefits
- High use temperature
- Non-stick and easy to clean
- Passes food contact regulation
- Low oligomer content vs PA66
- Kitchen Appliance Gears, Dishwasher Proof Application Data
Details
Stanyl® TE200F6 contains 30% glass reinforcement and is ideal for use in products that require dishwasher safe performance. Manufacturers can achieve higher motor speed, higher loads and extended warranties with the superior mechanical performance of Stanyl® TE200F6.Benefits
Stanyl® PA46 allows for reliable solutions due to its good resistance to permanent deformation when temperatures due to friction exceed 100°C, its good retention of gear accuracy at elevated temperatures and during highly loaded conditions and its resistance to variable loading via multi-function operations- Kitchen Utensils Application Data
Details
Application requirements Stiffness at high temperature Long term heat resistance Dishwasher proof Food contact Good esthetics Thermal shock resistance Water cooled tooling capable & high productivity Material properties HDT- A ForTii 305-320°C HDT-A Stanyl® 290°C HDT-A EcoPaXX 215°C Approved food contact regulation including EU 2011-10, FDA
Benefits
- High use temperature
- Non-stick and easy to clean
- Passes food contact regulation
- Low oligomer content vs PA66
- Spatulas and Kitchenware Application Data
Details
Stanyl® TE200F6-FC is food approvedBenefits
- Stanyl® PA46 and Akulon® PA66 allow reliable solutions, since Stanyl® PA46 offers much higher melting temperature and HDT than PA66 and Akulon® PA66 has significantly higher melting temperature resistance than PP and PA6
- Stanyl® PA46 allows for cost effective solutions since it offers high flowability enabling very thin wall designs and faster injection molding cycle times than PA66
Properties
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Modulus 10000 / 6000 MPa ISO 527-1/-2 Tensile Modulus (-40°C) 10200 / - MPa ISO 527-1/-2 Tensile Modulus (120°C) 5300 / - MPa ISO 527-1/-2 Tensile Modulus (160°C) 4750 / * MPa ISO 527-1/-2 Tensile Modulus (180°C) 4550 / * MPa ISO 527-1/-2 Tensile Modulus (200°C) 4300 / * MPa ISO 527-1/-2 Tensile Modulus (Low Thickness, 1mm) - Dry 10000 MPa ISO 527-1/-2 Tensile Modulus (Low Thickness) - cond. 6000 MPa ISO 527-1/-2 Stress at Break 210 / 115 MPa ISO 527-1/-2 Stress at Break (-40°C) 250 / - MPa ISO 527-1/-2 Stress at Break (120°C) 115 / - MPa ISO 527-1/-2 Stress at Break (160°C) 100 / * MPa ISO 527-1/-2 Stress at Break (180°C) 95 / * MPa ISO 527-1/-2 Stress at Break (200°C) 90 / * MPa ISO 527-1/-2 Stress at Break, at low thickness 210 / 115 MPa ISO 527-1/-2 Stress at Break (Thickness tested) 1 / - mm ISO 527-1/-2 Strain at Break 3.7 / 6 % ISO 527-1/-2 Strain at Break (at -40°C) 3.5 / - % ISO 527-1/-2 Strain at Break (at 120°C) 7.5 / - % ISO 527-1/-2 Strain at Break (at 160°C) 8 / * % ISO 527-1/-2 Strain at Break (at 180°C) 8 / * % ISO 527-1/-2 Strain at Break (at 200°C) 8 / * % ISO 527-1/-2 Strain at Break, at low thickness 3.8 / 6.5 % ISO 527-1/-2 Strain at Break (Thickness tested) 1 / - mm ISO 527-1/-2 Flexural Modulus 9500 / 5500 MPa ISO 178 Flexural Modulus (at 120°C) 5100 / * MPa ISO 178 Flexural Modulus (at 160°C) 4900 / * MPa ISO 178 Flexural Strength 300 / 180 MPa ISO 178 Flexural Strength (at 120°C) 160 / * MPa ISO 178 Flexural Strength (at 160°C) 130 / * MPa ISO 178 Charpy Impact Strength (at +23°C) 80 / 100 kJ/m² ISO 179/1eU Charpy Impact Strength (at -30°C) 65 / 75 kJ/m² ISO 179/1eU Charpy Notched Impact Strength (at +23°C) 12 / 21 kJ/m² ISO 179/1eA Charpy Notched Impact Strength (at -30°C) 11 / 11 kJ/m² ISO 179/1eA Izod Notched Impact Strength (at +23°C) 12 / 21 kJ/m² ISO 180/1A Izod Notched Impact Strength (at -40°C) 11 / 11 kJ/m² ISO 180/1A Weldline Strength (at thickness 4 / * mm) 100 / 70 MPa ISO 527-1/-2 Weldline Strain (at thickness 4 / * mm) 1.5 / 2.4 % ISO 527-1/-2 - Thermal Properties
Value Units Test Method / Conditions Melting Temperature (10°C/min) 295 / * °C ISO 11357-1/-3 Glass Transition Temperature (at 10°C/min) 75 / * °C ISO 11357-1/-2 Temperature of Deflection Under Load (1.80 MPa) 290 / * °C ISO 75-1/-2 Temperature of Deflection Under Load (0.45 MPa) 290 / * °C ISO 75-1/-2 Vicat Softening Temperature (50°C/h 50N) 290 / * °C ISO 306 Coefficient of Linear Thermal Expansion (parallel) 0.25 / * E-4/°C ISO 11359-1/-2 Coefficient of Linear Thermal Expansion (normal) 0.6 / * E-4/°C ISO 11359-1/-2 Burning Behaviour (at 1.5 mm Nominal Thickness) UL HB / * class IEC 60695-11-10 Burning Behaviour (at 3.0 mm Nominal Thickness) UL HB / * class IEC 60695-11-10 Oxygen Index 22 / * % ISO 4589-1/-2 Glow Wire Flammability Index (at thickness 3 / - mm) 925 / - °C IEC 60695-2-12 Glow Wire Flammability Index (at thickness 0.75 / - mm) 675 / - °C IEC 60695-2-12 Glow Wire Ignition Temperature (at thickness 3 / - mm) 725 / - °C IEC 60695-2-13 Glow Wire Ignition Temperature (at thickness 0.75 / - mm) 700 / - °C IEC 60695-2-13 Thermal Index (2500 hrs) 171 / * °C IEC 60216/ISO 527-1/-2 Thermal Index (5000 hrs) 159 / * °C IEC 60216/ISO 527-1/-2 Thermal Index (10000 hrs) 147 / * °C IEC 60216/ISO 527-1/-2 Thermal Index (20000 hrs) 137 / * °C IEC 60216/ISO 527-1/-2 - Electrical Properties
Value Units Test Method / Conditions Relative Permittivity (100Hz) 4.4 / 12 - IEC 62631-2-1 Relative Permittivity (1 MHz) 4 / 4.6 - IEC 62631-2-1 Relative Permittivity (1GHz) 3.6 / - - IEC 60250 Dissipation Factor (100 Hz) 80 / 1500 E-4 IEC 62631-2-1 Dissipation Factor (1 MHz) 230 / 900 E-4 IEC 62631-2-1 Dissipation Factor (1GHz) 300 / - E-4 IEC 60250 Volume Resistivity 1E13 / 1E9 Ohm*m IEC 62631-3-1 Surface Resistivity - / 1E14 Ohm IEC 62631-3-2 Electric Strength 35 / 25 kV/mm IEC 60243-1 Comparative Tracking Index 500 / - V IEC 60112 - Material Specific Properties
Value Units Test Method / Conditions Viscosity Number 145 / * cm³/g ISO 307, 1157, 1628 - Rheological Calculation Properties
Value Units Test Method / Conditions Density of Melt 1280 / * kg/m³ - Thermal Conductivity of Melt 0.28 / * W/(m K) - Specific Heat Capacity Melt 2430 / * J/(kg K) - Effective Thermal Diffusivity 9.02E-8 / * m²/s - - Other Properties
Value Units Test Method / Conditions Water Absorption 9.5 / * % Sim. to ISO 62 Water Absorption in Water (at 23°C after 24h) 2.65 / * % ISO 62 Humidity Absorption 2.6 / * % Sim. to ISO 62 Density 1410 / - kg/m³ ISO 1183 - Rheological Properties
Value Units Test Method / Conditions Molding Shrinkage (parallel) 0.5 / * % Sim. to ISO 294-4 Molding Shrinkage (normal) 1.3 / * % Sim. to ISO 294-4 Spiral Flow Length 1.0 mm 800 bar 100 / * mm - Spiral Flow Length 1.0 mm 900 bar 110 / * mm - Spiral Flow Length 1.0 mm 1000 bar 120 / * mm - - Grade Coding for Injection Molding
Stanyl® PA46 reinforced injection molding grades.
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Technical Details & Test Data
- Ageing Strain at Break
- Chemical Resistance
Chemical Type Chemical Name Resistance Other Acetaldehyde (40% by mass) at 23°C resistant Other Acetamide (50% by mass) at 23°C limited resistant, tests necessary to verify Other Acetamide (50% by mass) at >140°C not resistant Other Acetic acid (10% by mass) at 100°C not resistant Other Acetic acid (10% by mass) at 23°C limited resistant, tests necessary to verify Other Acetic acid (95% by mass) at 23°C not resistant Ketones Acetone at 23°C resistant Other Acetophenone at 23°C resistant Other Acetyl chloride at 23°C not resistant Other Acetylene at 23°C resistant Other Acrylic acid at 23°C not resistant Other Aliphatic amines at 23°C resistant Other Aliphatic hydrocarbons at 23°C resistant Other Alkylbenzenes at 23°C resistant Other Allyl alcohol at 23°C limited resistant, tests necessary to verify Other Aluminum acetate (saturated) at 23°C resistant Other Aluminum chloride (10% by mass) at 23°C resistant Other Aluminum hydroxide (saturated) at 23°C resistant Other Aluminum salts of mineral acids (saturated) at 23°C limited resistant, tests necessary to verify Other Aluminum trichloride (10% by mass) at 23°C resistant Other Amino acids (saturated) at 23°C resistant Other Ammonia at 23°C limited resistant, tests necessary to verify Other Ammonium chloride (35% by mass) at 100°C limited resistant, tests necessary to verify Other Ammonium chloride (35% by mass) at 23°C resistant Other Ammonium salts of mineral acids (10% by mass) at 23°C resistant Other Ammonium salts of mineral acids (10% by mass) at 50°C limited resistant, tests necessary to verify Other Ammonium thiocyanate (saturated) at 23°C resistant Other Amyl acetate at 100°C not resistant Other Amyl acetate at 23°C resistant Other Amyl alcohol at 23°C resistant Other Aniline at 23°C limited resistant, tests necessary to verify Other Anodizing liquid (HNO3/H2SO4) at 23°C limited resistant, tests necessary to verify Other Antimony trichoride (saturated) at 23°C not resistant Other Aqua Regia (HCl/HNO3) at 23°C not resistant Other Aromatic hydrocarbons at 23°C resistant Other ASTM 3 at 23°C limited resistant, tests necessary to verify Other Bariumsalts of mineral acids at 23°C limited resistant, tests necessary to verify Other Benzaldehyde at 23°C limited resistant, tests necessary to verify Other Benzene at 23°C resistant Other Benzene at 80°C resistant Other Benzoic acid (20% by mass) at 23°C limited resistant, tests necessary to verify Other Benzoic acid (saturated) at 23°C not resistant Other Benzyl alcohol at 23°C limited resistant, tests necessary to verify Other Beverages at 23°C resistant Other Bleaching agent (NaOCl) at 23°C not resistant Other Boric acid (10% by mass) at 23°C limited resistant, tests necessary to verify Other Boron trifluoride at 23°C not resistant Other Brake fluids (DOT 3/4) at 23°C resistant Other Bromine water (saturated) at 23°C not resistant Other Bromochlorodifluoromethane at 23°C resistant Other Bromotrifluoromethane at 23°C resistant Other Butadiene at 23°C resistant Other Butane at 23°C resistant Other Butanediols at 23°C resistant Other Butanediols at >140°C limited resistant, tests necessary to verify Other Butanols at 23°C resistant Other Butene glycol at 23°C resistant Other Butene glycol at >160°C limited resistant, tests necessary to verify Other Butene-1 at 23°C resistant Other Butter at 23°C limited resistant, tests necessary to verify Other Butyl acetate at 23°C resistant Other Butyl acrylate at 23°C resistant Other Butyl glycolate at 23°C resistant Other Butyl phthalate at 23°C resistant Other Butyric acid (20% by mass) at 23°C limited resistant, tests necessary to verify Other Butyrolactone at 23°C resistant Other Butyrolactone at >90°C limited resistant, tests necessary to verify Other Calcium chloride (10% by mass) at 100°C limited resistant, tests necessary to verify Other Calcium chloride (10% by mass) at 23°C resistant Other Calcium chloride (alcoholic) (20% by mass) at 23°C limited resistant, tests necessary to verify Other Calcium chloride (saturated) at 100°C not resistant Other Calcium chloride (saturated) at 23°C resistant Other Calcium chloride (saturated) at 60°C limited resistant, tests necessary to verify Other Calcium hydroxide (saturated) at 23°C resistant Other Calcium hypochloride (saturated) at 23°C not resistant Other Camphor (alcoholic) (50% by mass) at 23°C resistant Other Caprolactam (50% by mass) at 23°C resistant Other Caprolactam (50% by mass) at >150°C limited resistant, tests necessary to verify Other Carbon disulfide at 23°C resistant Other Carbon disulfide at 60°C not resistant Other Carbon tetrachloride at 23°C resistant Other Casein at 23°C resistant Other Chloral hydrate at 23°C not resistant Other Chloramines (10% by mass) at 23°C not resistant Other Chlorinated biphenyls at 80°C limited resistant, tests necessary to verify Other Chlorine water at 23°C not resistant Other Chloroacetic acid (10% by mass) at 23°C not resistant Other Chlorobenzene at 23°C resistant Other Chlorobenzene at 50°C resistant Other Chlorobromomethane at 23°C limited resistant, tests necessary to verify Other Chlorodifluoroethane at 23°C resistant Other Chlorodifluoromethane at 23°C resistant Other Chlorofluoroethylene at 23°C resistant Other Chloroform at 23°C not resistant Other Chlorosulfonic acid (10% by mass) at 23°C not resistant Other Chromic acid (1% by mass) at 23°C limited resistant, tests necessary to verify Other Chromic acid (10% by mass) at 23°C not resistant Other Chromyl chloride at 23°C not resistant Other cis-2-butene at 23°C resistant Other Citric acid (10% by mass) at 23°C limited resistant, tests necessary to verify Other Cobalt salt (20% by mass) at 23°C limited resistant, tests necessary to verify Other Copper sulfate (10% by mass) at 23°C resistant Other Copper(II) salt (10% by mass) at 23°C limited resistant, tests necessary to verify Other Cresols at 23°C not resistant Other Cycloalcohols (incl their esters) at 23°C resistant Other Cycloalkanes at 23°C resistant Other Cycloalkanones at 23°C resistant Other Decalin at 23°C resistant Other Developer (photografic) at 23°C resistant Other Dibutyl phthalate at 23°C resistant Other Dibutyl phthalate at 60°C resistant Other Dichlorobenzene at 23°C resistant Other Dichloroethane at 23°C resistant Other Dichloroethylene at 23°C resistant Other Dichlorofluoromethane at 23°C resistant Other Dichlorotetrafluoroethane at 23°C resistant Ethers Diethyl ether at 23°C resistant Other Diethylene glycol at 23°C resistant Other Diethylene glycol at >140°C not resistant Other Difluoromethane at 23°C resistant Other Dimethyl acetamide at 23°C resistant Other Dimethyl acetamide at >150°C not resistant Other Dimethyl ether at 23°C resistant Other Dimethylamine at 23°C resistant Other Dimethylformamide at 23°C resistant Other Dimethylformamide at 90°C limited resistant, tests necessary to verify Other Dimethylsilane at 23°C resistant Other Dimethylsulfoxide at 125°C not resistant Other Dimethylsulfoxide at 23°C resistant Other Dioctyl phtalate at 23°C resistant Other Dioxan at 23°C resistant Other Dioxan at 60°C resistant Other Diphenyl ether at 80°C resistant Other Dipropyl ether at 23°C resistant Other Edible fats waxes and oils at 100°C limited resistant, tests necessary to verify Other Electroplating bath (acidic) at 23°C not resistant Other Electroplating bath (alkali) at 23°C resistant Other Ethane at 23°C resistant Alcohols Ethanol at 23°C resistant Other Ethyl Acetate at 23°C resistant Other Ethyl chloride at 23°C resistant Other Ethylene at 23°C resistant Other Ethylene carbonate at 100°C not resistant Other Ethylene carbonate at 50°C resistant Other Ethylene chlorohydrin at 23°C limited resistant, tests necessary to verify Other Ethylene glycol at 100°C not resistant Other Ethylene glycol at 23°C resistant Other Ethylene oxide at 23°C resistant Other Ethylene oxide at >80°C not resistant Other Ethylenediamine at 23°C resistant Other Fatty acids at 23°C resistant Other Fatty alcohols at 23°C resistant Other Fixer (photografic) at 23°C resistant Other Fluorinated hydrocarbons at 70°C resistant Other Fluorine at 23°C not resistant Other Formaldehyde (30% by mass) at 23°C resistant Other Formamide at 23°C resistant Other Formamide at >150°C not resistant Other Formic acid (10% by mass) at 23°C not resistant Other Formic acid (10% by mass) at 50°C not resistant Other Fruit juices at 23°C limited resistant, tests necessary to verify Other Fuel; Diesel at 85°C resistant Other Fuel; FAM 1A at 23°C resistant Other Fuel; FAM 2A at 23°C limited resistant, tests necessary to verify Other Fuel; Gasoline at 85°C limited resistant, tests necessary to verify Other Fuel; LPG at 23°C limited resistant, tests necessary to verify Other Furfural at 23°C limited resistant, tests necessary to verify Other Furfuryl alcohol at 23°C limited resistant, tests necessary to verify Other Glucose at 23°C limited resistant, tests necessary to verify Other Glycerol at 170°C limited resistant, tests necessary to verify Other Glycerol at 23°C limited resistant, tests necessary to verify Other Glycolic acid (30% by mass) at 23°C limited resistant, tests necessary to verify Other Glycols at 23°C limited resistant, tests necessary to verify Other Grease (based on ester oils) at <100°C limited resistant, tests necessary to verify Other Grease (based on metal soaps) at <100°C limited resistant, tests necessary to verify Other Grease (based on polyphenylester) at <100°C limited resistant, tests necessary to verify Other Hardening oils at 23°C resistant Other Heating oils at 23°C resistant Other Heptane at 23°C resistant Other Hexachlorobenzene at 80°C resistant Other Hexachloroethane at 23°C resistant Other Hexafluoroisopropanol at 23°C not resistant Other Hexane at 23°C resistant Other Hydraulic fluids at 100°C resistant Other Hydrobromic acid (10% by mass) at 23°C not resistant Other Hydrochloric acid (10% by mass) at 23°C not resistant Other Hydrochloric acid (20% by mass) at 23°C not resistant Other Hydrochloric acid (conc.% by mass) at 23°C not resistant Other Hydrofluoric acid (40% by mass) at 23°C not resistant Other Hydrofluoric acid (5% by mass) at 23°C not resistant Other Hydrogen at 23°C resistant Other Hydrogen peroxide (0.5% by mass) at 23°C resistant Other Hydrogen peroxide (3% by mass) at 23°C not resistant Other Hydrogen peroxide (30% by mass) at 23°C not resistant Other Hydrogen sulfide (10% by mass) at 23°C limited resistant, tests necessary to verify Other Hydroiodic acid at 23°C not resistant Other Hydroquinone (5% by mass) at 23°C not resistant Other Impregnating oils at 23°C resistant Other Ink at 23°C resistant Other Iodine (alcoholic) at 23°C not resistant Other Iron(III)chloride (acidic) (10% by mass) at 23°C not resistant Other Iron(III)chloride (neutral) (10% by mass) at 23°C limited resistant, tests necessary to verify Other Iron(III)chloride (saturated) at 23°C not resistant Other Iron(III)thiocyanate (10% by mass) at 23°C limited resistant, tests necessary to verify Other Isocyanates (aromatic) at 23°C resistant Other Isooctane at 80°C resistant Other Isopropanol at 23°C resistant Other Isopropanol at 60°C resistant Other Ketones (aliphatic) at 23°C resistant Other Lactic acid at 10°C resistant Other Lactic acid at 90°C not resistant Other Lead acetate (10% by mass) at 23°C resistant Other Linseed oil at 23°C resistant Other Lithium bromide (10% by mass) at 23°C limited resistant, tests necessary to verify Other Lithium chloride (20% by mass) at 23°C not resistant Other Lithium hydroxide (10% by mass) at 23°C resistant Other Lithium hydroxide (10% by mass) at 80°C not resistant Other Lubricating oil (gear) at <130°C resistant Other Lubricating oil (hydraulics) at <130°C resistant Other Lubricating oil (transformers) at <130°C resistant Other Magnesium hydroxide (10% by mass) at 23°C limited resistant, tests necessary to verify Other Magnesium salts (10% by mass) at 23°C resistant Other Maleic acid (25% by mass) at 23°C limited resistant, tests necessary to verify Other Maleic acid (saturated) at 23°C resistant Other Manganese salts (10% by mass) at 23°C resistant Other Mercury at 23°C resistant Other Mercury(II)chloride (saturated) at 23°C not resistant Other Methane at 23°C resistant Alcohols Methanol at 23°C limited resistant, tests necessary to verify Other Methyl acetate at 23°C resistant Other Methyl chloride at 23°C resistant Other Methyl ethyl ketone at 23°C resistant Other Methyl formate at 23°C resistant Other Methyl glycol at 23°C resistant Other Methylamine at 23°C resistant Other Methylaniline at 23°C resistant Other Methylbromide at 23°C resistant Other Methylene chloride at 23°C limited resistant, tests necessary to verify Other Methylpyrrolidone at 23°C resistant Other Milk at 23°C limited resistant, tests necessary to verify Other n-Butyl ether at 23°C resistant Other n-Butyl glycol at 23°C resistant Other Naphtha at 23°C resistant Other Naphthalene at 23°C resistant Other Naphthalenesulfonic acids at 23°C not resistant Other Naphthenic acids at 23°C resistant Other Naphthols at 23°C not resistant Other Nickel nitrate (10% by mass) at 23°C limited resistant, tests necessary to verify Other Nickel salts (10% by mass) at 23°C resistant Other Nitric acid (2% by mass) at 23°C not resistant Other Nitric acid (conc.% by mass) at 23°C not resistant Other Nitrobenzene at 23°C limited resistant, tests necessary to verify Other Nitrobenzene at >100°C not resistant Other Nitrocellulose lacquers (alcoholic) at 23°C limited resistant, tests necessary to verify Other Nitrocellulose lacquers (non-alcoholic) at 23°C resistant Other Nitrogen oxides at 23°C limited resistant, tests necessary to verify Other Nitromethane at 23°C limited resistant, tests necessary to verify Other Nitropropane at 23°C limited resistant, tests necessary to verify Other Nitrotoluene at 23°C limited resistant, tests necessary to verify Other Nitrotoluene at >100°C not resistant Other Nitrous fumes at 23°C limited resistant, tests necessary to verify Other Nitrous oxide at 23°C resistant Other Octane at 23°C resistant Other Octene at 23°C resistant Other Oil (Burmah TAF 21) at 23°C resistant Other Oil (Castrol TAF) at 23°C resistant Other Oil (Shell 10W40) at 23°C resistant Other Oil (Shell Dexron ATF) at 23°C resistant Other Oil (Shell Spirax EP90) at 23°C limited resistant, tests necessary to verify Other Oil (transformers, switchgear) at 50°C resistant Other Oils (vegatable, mineral, ethereal) at 23°C resistant Other Oleic acid at 23°C resistant Other Oleum (H2SO4+SO3) at 23°C not resistant Other Oxalic acid (10% by mass) at 23°C limited resistant, tests necessary to verify Other Oxalic acid (10% by mass) at 80°C not resistant Other Ozone at 23°C not resistant Other Paint solvents at 23°C resistant Other Palmatic acid at 80°C resistant Other Paraffin at 23°C resistant Other Pentasin CHF 11 (S) at 23°C resistant Other Pentasin CHF 7.1 at 23°C limited resistant, tests necessary to verify Other Peracetic acid at 23°C not resistant Other Petroleum at 23°C resistant Other Petroleum ether and solvents at 80°C resistant Other Phenol (alc. sol.) (70% by mass) at 23°C limited resistant, tests necessary to verify Other Phenol (conc.% by mass) at 23°C not resistant Other Phenol at >40°C not resistant Other Phenyl ether at 23°C not resistant Other Phenyl ethyl alcohol at 23°C limited resistant, tests necessary to verify Other Phenyl ethyl alcohol at >160°C not resistant Other Phosphate sol. (neutral, alkaline) (10% by mass) at 23°C resistant Other Phosphine at 23°C resistant Other Phosphoric acid (10% by mass) at 23°C not resistant Other Phosphoric acid (conc.% by mass) at 23°C not resistant Other Phthalic acid (saturated) at 23°C limited resistant, tests necessary to verify Other Polyols at 23°C resistant Other Potassium bromide (10% by mass) at 23°C limited resistant, tests necessary to verify Other Potassium chloride (10% by mass) at 23°C resistant Other Potassium chloride (10% by mass) at 70°C resistant Other Potassium dichromate (5% by mass) at 23°C limited resistant, tests necessary to verify Other Potassium hydroxide (50% by mass) at 23°C limited resistant, tests necessary to verify Other Potassium nitrate (10% by mass) at 23°C resistant Other Potassium permanganate (1% by mass) at 23°C not resistant Other Potassium thiocyanate (saturated) at 23°C not resistant Other Propane at 23°C resistant Other Propanol at 23°C resistant Other Propanol at >100°C not resistant Other Propene at 23°C resistant Other Propionic acid (5% by mass) at 23°C resistant Other Propionic acid (50% by mass) at 23°C not resistant Other Pyridine at 23°C resistant Other Pyridine at 80°C limited resistant, tests necessary to verify Other Pyrrolidone at 23°C resistant Other Pyruvic acid (10% by mass) at 23°C limited resistant, tests necessary to verify Other Rainwater (acidic) at 23°C resistant Other Refrigerator oil at 23°C resistant Other Resorcinol (alcoholic) (50% by mass) at 23°C not resistant Other Road salts at 23°C resistant Other SAE 80 at 23°C resistant Other Salicylic acid (saturated) at 23°C resistant Other Seawater at 23°C resistant Other Silane at 23°C resistant Other Silicone oils at <80°C resistant Other Silicone oils at >100°C limited resistant, tests necessary to verify Other Silver nitrate (10% by mass) at 23°C resistant Other Soap solution (10% by mass) at 80°C limited resistant, tests necessary to verify Other Sodium bromide (10% by mass) at 23°C limited resistant, tests necessary to verify Other Sodium carbonate (10% by mass) at 23°C resistant Other Sodium chlorate (10% by mass) at 23°C resistant Other Sodium chloride (10% by mass) at 23°C resistant Other Sodium chlorite (10% by mass) at 23°C limited resistant, tests necessary to verify Other Sodium cyanide (10% by mass) at 23°C resistant Other Sodium dichromate (10% by mass) at 23°C resistant Other Sodium dodecylbenzenesulfonate at 23°C resistant Other Sodium hydrogen carbonate (10% by mass) at 23°C resistant Other Sodium hydrogen sulfate (10% by mass) at 23°C resistant Other Sodium hydrogen sulfite (10% by mass) at 23°C resistant Other Sodium hydroxide (10% by mass) at 23°C limited resistant, tests necessary to verify Other Sodium hydroxide (10% by mass) at 80°C not resistant Other Sodium hydroxide (50% by mass) at 23°C not resistant Other Sodium hypochlorite (10% by mass) at 23°C not resistant Other Sodium hypophosphite (10% by mass) at 23°C resistant Other Sodium lauryl sulfate (30% by mass) at 23°C resistant Other Sodium lignosulfonate at 23°C resistant Other Sodium nitrilotriacetate (10% by mass) at 23°C resistant Other Sodium oleate at 23°C resistant Other Sodium pentachlorophenolate at 23°C resistant Other Sodium pyrosulfite (10% by mass) at 23°C resistant Other Sodium salts (nitrate, sulfate) (10% by mass) at 23°C resistant Other Soldering fluid at 23°C not resistant Other Steam at 23°C limited resistant, tests necessary to verify Other Stearate at 23°C resistant Other Stearic acid at 23°C resistant Other Styrene at 80°C resistant Other Sulfonates (10% by mass) at 23°C resistant Other Sulfur at 23°C resistant Other Sulfur dioxide (dry) at 23°C resistant Other Sulfur dioxide (moist) at 23°C limited resistant, tests necessary to verify Other Sulfur hexafluoride at 23°C resistant Other Sulfuric acid (2% by mass) at 23°C not resistant Other Sulfuric acid (conc.% by mass) at 23°C not resistant Other Sulfurous acid (saturated) at 23°C limited resistant, tests necessary to verify Other Tartaric acid (10% by mass) at 23°C resistant Other Tartaric acid (50% by mass) at 23°C limited resistant, tests necessary to verify Other Tetrachloroethylene at 23°C limited resistant, tests necessary to verify Other Tetrachloroethylene at 80°C not resistant Other Tetrachloromethane at 23°C resistant Other Tetrafluoromethane at 23°C resistant Other Tetrafluoropropanol at 23°C not resistant Other Tetrahydrofuran at 23°C resistant Other Tetralin at 23°C resistant Other Tetramethylenesulfone at 23°C resistant Other Toluene at 100°C resistant Hydrocarbons Toluene at 23°C resistant Other Transformer oil at 23°C resistant Other Trichloroacetic acid (50% by mass) at 23°C not resistant Other Trichloroacetic acid ethyl ester at 23°C - Ageing Stress at Break
- Dynamic Shear Modulus (G)-Temperature (dry)
- Secant Modulus-Strain (cond.)
- Startup/Shut Down/Cleaning For Injection Molding
Production has to be started and stopped with a clean machine. Cleaning can be done with PA6-GF or PA66-GF, applicable cleaning agents or HDPE. Hot runners can also be cleaned and put out of production cleaning them with PA6-GF or PA66-GF.
- Secant Modulus-Strain (dry)
- Shearstress-Shear Rate
- Production Breaks For Injection Molding
- During production breaks longer than a few minutes, we advise emptying the barrel. The temperature of the barrel and the hot runner [if applicable] should be reduced to a level far enough below the melting point of the compound in order to stop decomposition of the compound.
- When the hot runner, nozzle, or even the screw is blocked, be aware that under these conditions a sudden outburst of molten material can take place. Always wear personal safety protections for hand/eye/body.
- Stress-Strain (cond.)
- Stress-Strain (dry)
- Stress-Strain (isochronous) 100°C (dry)
- Stress-Strain (isochronous) 140°C (dry)
- Stress-Strain (isochronous) 160°C (dry)
- Stress-Strain (isochronous) 23°C (dry)
- Viscosity-Shear Rate
Safety & Health
- Safety
For the safety properties of the material, we refer to our SDS which can be ordered at our sales offices. During practical operation we advise to wear personal safety protections for hand/eye/body.
Packaging & Availability
- Packaging Type
- Packaging for Injection Molding
Packaging
Stanyl® grades are supplied in airtight, moisture-proof packaging.