Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus 160 MPa ISO 178 Charpy Impact Strength (at +23°C) N kJ/m² ISO 179/1eU Charpy Impact Strength (at -30°C) N kJ/m² ISO 179/1eU Charpy Notched Impact Strength (at +23°C) N kJ/m² ISO 179/1eA Charpy Notched Impact Strength (at -30°C) N kJ/m² ISO 179/1eA Izod Notched Impact Strength (at +23°C) N kJ/m² ISO 180/1A Izod Notched Impact Strength (at -30°C) N kJ/m² ISO 180/1A - Thermal Properties
Value Units Test Method / Conditions Melting Temperature (10°C/min) 217 °C ISO 11357-1/-3 - Other Properties
Value Units Test Method / Conditions Density 1200 kg/m³ ISO 1183 - Mechanical Properties (Die Cutting)
Value Units Test Method / Conditions Stress at Break (normal) 16 MPa ISO 527-1/-2 Strain at Break (normal) 320 % ISO 527-1/-2 Tear Strength (normal) 75 kN/m ISO 34-1; Method B Tear Strength (parallel) 74 kN/m ISO 34-1; Method B - Mechanical Properties (TPE)
Value Units Test Method / Conditions Tensile Modulus 170 MPa ISO 527-1/-2 Stress at 5% strain 6.4 MPa ISO 527-1/-2 Stress at 10% strain 8.8 MPa ISO 527-1/-2 Stress at 50% strain 11 MPa ISO 527-1/-2 Stress at 100% strain 12 MPa ISO 527-1/-2 Stress at Break 15 MPa ISO 527-1/-2 Nominal Strain at Break 165 % ISO 527-1/-2 Shore D Hardness (3s) 44 - ISO 868 - Rheological Properties
Value Units Test Method / Conditions Melt Volume-Flow Rate (at 230 / * °C, 2.16 / * kg) 12.5 cm³/10min ISO 1133 Molding Shrinkage (parallel) 1.6 % Sim. to ISO 294-4 Molding Shrinkage (normal) 1.6 % Sim. to ISO 294-4
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Chemical Resistance
Chemical Type Chemical Name Resistance Other Acetic acid (10% by mass) at 23°C resistant Ketones Acetone at 23°C resistant Other Ammonium hydroxide (10% by mass) at 23°C limited resistant, tests necessary to verify Other ASTM 1 at 23°C resistant Other ASTM 3 at 23°C resistant Other Brake fluids (DOT 3/4) at 23°C not resistant Other Calcium chloride (10% by mass) at 23°C limited resistant, tests necessary to verify Other Chloroform at 23°C not resistant Ethers Diethyl ether at 23°C limited resistant, tests necessary to verify Alcohols Ethanol at 23°C limited resistant, tests necessary to verify Other Ethyl Acetate at 23°C limited resistant, tests necessary to verify Other Fuel; Diesel at 85°C resistant Other Hydrochloric acid (10% by mass) at 23°C resistant Other Hydrogen peroxide (30% by mass) at 23°C limited resistant, tests necessary to verify Other Nitric acid (10% by mass) at 23°C resistant Other Phosphoric acid (10% by mass) at 23°C resistant Other Sodium hydroxide (10% by mass) at 23°C resistant Other Sulfuric acid (30% by mass) at 23°C resistant Other Tetrachloroethylene at 23°C limited resistant, tests necessary to verify Hydrocarbons Toluene at 23°C resistant Other Transformer oil at 23°C not resistant Other Trichloroethylene at 23°C not resistant Other Water at 23°C resistant Other Zinc chloride (10% by mass) at 23°C resistant - Dynamic Tensile Modulus (E)-Temperature
- Specific Volume-Temperature (pvT)
- Stress-Strain (TPE)
- Viscosity-Shear Rate
Packaging & Availability
- Packaging Type