Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Nominal Strain at Break min. 50 % ISO 527-1/-2 - Thermal Properties
Value Units Test Method / Conditions Melting Temperature (At 10°C/min) 207 °C ISO 11357-1/-3 - Electrical Properties
Value Units Test Method / Conditions Volume Resistivity min. 1E13 Ohm*m IEC 62631-3-1 - Rheological Calculation Properties
Value Units Test Method / Conditions Density of Melt 975 kg/m³ - Specific Heat Capacity Melt 1900 J/(kg K) - - Other Properties
Value Units Test Method / Conditions Density 1210 kg/m³ ISO 1183 - Mechanical Properties (TPE)
Value Units Test Method / Conditions Tensile Modulus 270 MPa ISO 527-1/-2 Stress at 10% Strain 14 MPa ISO 527-1/-2 Stress at Break 36 MPa ISO 527-1/-2 Strain at Break min. 300 % ISO 527-1/-2 Shore D Hardness (At 3s) 55 - ISO 868 - Rheological Properties
Value Units Test Method / Conditions Melt Volume-Flow Rate (At 230°C, 2.16kg) 27 cm³/10min ISO 1133
Regulatory & Compliance
- Certifications & Compliance
- OEM Specifications
- OEM Standards
Technical Details & Test Data
- Viscosity-Shear Rate
- Shear Stress-Shear Rate
- Dynamic Shear Modulus (G)-Temperature
- Chemical Resistance Data
Chemical Name Chemical Resistance Acetic acid (10% by mass) at 23°C Resistant Acetone at 23°C Resistant ASTM 1 at 23°C Resistant ASTM 3 at 23°C Resistant Fuel; Diesel at 85°C Resistant Hydrochloric acid (10% by mass) at 23°C Resistant Nitric acid (10% by mass) at 23°C Resistant Phosphoric acid (10% by mass) at 23°C Resistant Sodium hydroxide (10% by mass) at 23°C Resistant Sulfuric acid (30% by mass) at 23°C Resistant Toluene at 23°C Resistant Water at 23°C Resistant Zinc chloride (10% by mass) at 23°C Resistant Brake fluids (DOT 3/4) at 23°C Not resistant Chloroform at 23°C Not resistant Transformer oil at 23°C Not resistant Trichloroethylene at 23°C Not resistant Ammonium hydroxide (10% by mass) at 23°C Limited resistant, tests necessary to verify
Calcium chloride (10% by mass) at 23°C Limited resistant, tests necessary to verify
Diethyl ether at 23°C Limited resistant, tests necessary to verify
Ethanol at 23°C Limited resistant, tests necessary to verify
Ethyl Acetate at 23°C Limited resistant, tests necessary to verify
Hydrogen peroxide (30% by mass) at 23°C Limited resistant, tests necessary to verify
Tetrachloroethylene at 23°C Limited resistant, tests necessary to verify