Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Form
- Mechanical Properties
Value Units Test Method / Conditions Charpy Impact Strength (7,5 J) 70 kJ/m2 DIN EN ISO 179-1eU Elongation at Break (50 mm/min) 4 % DIN EN ISO 527-1 Modulus of Elasticity (Tensile test, 50 mm/min) 8500 MPa DIN EN ISO 527-1 Tensile Strength (50 mm/min) 142 MPa DIN EN ISO 527-1 - Thermal Properties
Value Units Test Method / Conditions Glass Transition Temperature 148 °C - Service Temperature (long term) 120 °C - Service Temperature (short term) 140 °C - - Other Properties
Value Units Test Method / Conditions Bulk Density 0.65 g/cm3 EN ISO 60 Melt Flow Index (300°C / 1.20 kg) 5 g/10 min DIN EN ISO 1133 - Processing Information
Processing Parameter Value Unit Cylinder/processing temperature 280 - 320 °C Mold temperature 80 - 110 °C Material temperature 290 - 310 °C - This material can be processed as a thermoplastic taking the normal technical provisions into account. The above mentioned information refers exclusively to the injection molding process.
- Processing should be carried out as gently as possible, in order to maintain the maximum fiber length in the component. Back pressure and injection rate should be adjusted to the component geometry accordingly. The optimum processing temperature depends upon the respective geometry of the molded part and can be different from machine to machine.
- Predrying
Predrying Value Unit Permissible residual moisture content < 0.02 % Drying temperature 120 °C Drying time 2 - 6 h - To achieve optimum mechanical properties, it is recommended to pre-dry the material w ith the above mentioned parameters.
Storage & Handling
- Storage & Shelf Life
- The granules must be stored in dry, normally tempered rooms and in closed containers. For moisture-sensitive materials, the granules must be sealed airtight. Protection against direct sunlight must be guaranteed. The granules are usually subject to the requirements of no shelf life limitation. Shelf Life maybe limited by some additives.