Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Energy Technology Group ETG-1000

Energy Technology Group ETG-1000 functions as a protective, film-forming corrosion inhibitor and scale suppressant to keep engines clean and free from scale, and reduces downtime and maintenance costs. It protects cooling systems against corrosion, liner pitting, cavitation-erosion, mineral scale deposits and electrolysis.

Functions: Corrosion Inhibitor, Scale Inhibitor

Features: Good Film Former, Low Erosion, Pitting Protection, Sludge Build-up Prevention

End Uses: Diesel Engine Oils

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Fluids & Lubricants Functions
Corrosion Inhibitor,
Scale Inhibitor
Technologies
Fluids & Lubricants
Product Families
Fluids & Lubricants — Additives
Performance Additives,
Surface Protective Additives

Features & Benefits

Fluids & Lubricants Features
Good Film Former,
Low Erosion,
Pitting Protection,
Sludge Build-up Prevention
Benefits
  • Designed to protect cast iron diesel engine cooling systems
  • Contains additives to protect against sludge and mineral scale  formation
  • Prevents overheating
  • Effective against liner pitting and cavitation erosion
  • Not harmful to radiator or heater connecting hoses, diesel liner seals and O-ring
  • Recommended and used by major diesel engine manufacturers throughout the world

Applications & Uses

Markets
Automotive & Transportation
Applications
Automotive & Transportation — Lubricants & Functional Fluids
Automotive Fluids & Lubricants
Fluids & Lubricants End Use
Diesel Engine Oils
Instructions For Use
  • Before Treatment: Drain, chemically clean and flush the cooling system before charging with
  1. ETG-1000 to remove dirt, deposits, oil and rust particles.
  • Initial Dosage: Add ETG-1000 to the system at an initial dosage of 1 pint for every 4 gallons of cooling system capacity.
  • Preventive Maintenance Treatment:
  1. Top Off: Never top off with plain water. Always top up with a mixture of one part ETG-1000 for every 32 parts of clean, soft water.
  2. Make Up Dosage: Maintain the correct treatment level of inhibitor level by adding additional
  • ETL-1000 inhibitor:
  • For systems less than 20 gallons: One pint for every 4 gallon capacity, every 12,000 miles or 250 hours.
  • For systems larger than 20 gallons: One pint for every 20 gallons capacity, every routine service.
  • Product Life: ETG-1000, once in use, should be drained and flushed once every 12 months.

Properties

Color
Red
Odor
Slight
Soluble in
Water

Regulatory & Compliance

Quality

It is made under ISO9002.

Technical Details & Test Data

Testing
  • For control, use a test kit available from Energy Technology Group that tests for glycol and nitrite.
  • Maintain a nitrite reserve of 1000 - 1500 ppm.
Remarks

Technical representatives can assist in the evaluation and implementation of a treatment program involving this product.

Storage & Handling

Handling & Storage

ETL-1000 may be stored up to one year. The product becomes "mushy" at 15°F (26°C) and is satisfactory for use after complete thawing.