EMPILON® HA80

EMPILON® HA80 is a blending material based on modified hydrogenated Styrenic block copolymer, with a hardness range from Shore A39 to Shore A85. Its main processing method is double injection or co-extrusion.

Brand: EMPILON (10 products)

Polymer Name: Thermoplastic Elastomer (unspecified)

Processing Methods: Calendering, Coextrusion, Extrusion, Injection Molding

End Uses: Handles

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Polymer Name: Thermoplastic Elastomer (unspecified)
Technologies: Elastomers
Product Families: Elastomers — Thermoplastic Elastomers
Other Thermoplastic Elastomers

Features & Benefits

Labeling Claims: Environmentally Friendly,
Halogen-free,
Heavy Metal-free,
Non-Toxic,
Phthalates-free,
Recyclable
Materials Features: Anti-Slip,
Chemical Resistant,
Excellent Transparency Properties,
Good Mechanical Properties,
Good Weather Stability,
Heat Aging Resistant,
High Resilience,
Hydrolysis Resistant,
Low Hardness,
Low Specific Gravity,
Thermal Shock Resistant

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics
Applications: Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Other Devices & Assemblies
Consumer Goods — Other Consumer Goods Applications
Plastics & Elastomers End Uses: Handles
Plastics & Elastomers Processing Methods: Calendering,
Coextrusion,
Extrusion,
Injection Molding

Properties

Color

Typical Properties


	Value	Units	Test Method / Conditions
Specific gravity	1.07	-	ASTM D792
Hardness	78	Shore A	ASTM D2240
Tensile strength	90	kgf/cm2	ASTM D412
Elongation at Break	500	%	ASTM D412
Melt Index	G7	g/10min	ASTM D1238
ABS Adhesion	12	kgf/2.5cm	HT Method
PC Adhesion	12	kgf/2.5cm	HT Method
Brittle Temperature	-40	°C	Estimate
Shrinkage (Reference Only)	0.7	%	Machine Direction
Shrinkage (Reference Only)	0.9	%	Transverse Direction

Regulatory & Compliance

Certifications & Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS),
Waste Electrical & Electronic Equipment Directive (WEEE)

Technical Details & Test Data

HAR Series Properties/Injection Molding Information

Injection Molding	Most olefin plastic machines can be used for injection molding
Compression Ratio	2.4 and higher
Cylinder Temperature (Feed Zone)	180-190 °C
Cylinder Temperature (Center Zone)	185-200 °C
Cylinder Temperature (Front Zone)	195-205 °C
Cylinder Temperature (Nozzle)	200-220 °C
Mold Temperature	30-50 °C
Injection Pressure	30-50 kg/cm2
Injection Rate	Moderate
Hold Time	5 sec.
Screw Speed	Medium
Back Pressure	5-10 kg/cm2
Cycle Time (Goods material thickness under 2 mm)	15-30 sec.

Please adjust the injection molding temperature based on the product size and mold structure around 180 °C to 220 °C during processing, but not exceeding 240 °C.