Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Mechanical Properties
Value Units Test Method / Conditions Yield Stress (at 50mm/min) 41.0 MPa ISO 527-1,-2 Tensile Modulus (at 1mm/min) 2300.0 MPa ISO 527-1,-2 Flexural Strength (at 2 mm/min) 65.0 MPa ISO 178 Flexural Modulus (at 2 mm/min) 2200.0 MPa ISO 178 Izod Notched Impact Strength (at 23°C) 18.0 kJ/m² ISO 180-1A Izod Notched Impact Strength (at -30°C) 12.0 kJ/m² ISO 180-1A Charpy Impact Strength (at 23°C) 100.0 kJ/m² ISO 179-1eU Charpy Impact Strength (at -30°C) 80.0 kJ/m² ISO 179-1eU Charpy Notched Impact Strength (at 23°C) 18.0 kJ/m² ISO 179-1eA Charpy Notched Impact Strength (at -30°C) 11.0 kJ/m² ISO 179-1eA Ball Indentation Hardness 103.0 N/mm² ISO 2039-1 - Thermal Properties
Value Units Test Method / Conditions Temperature of Deflection Under Load (at 1.80 MPa) 92.0 °C ISO 75-1,-2 Temperature of Deflection Under Load (at 0.45 MPa) 97.0 °C ISO 75-1,-2 Vicat Softening Temperature (at 50N, 120ºC/h) 97.0 °C ISO 306 Vicat Softening Temperature (at 50N, 50ºC/h) 95.0 °C ISO 306 Coefficient of Linear Thermal Expansion (Parallel, 23 - 55°C) 1.0 10^{-4} /K ISO 11359-1,-2 Coefficient of Linear Thermal Expansion (Transverse, 23 - 55°C) 1.0 10^{-4} /K ISO 11359-1,-2 - Typical Properties
Value Units Test Method / Conditions Density 1.05 g/cm³ ISO 1183 - Electrical Properties
Value Units Test Method / Conditions Relative Permittivity (at 100MHz) 2.9 - IEC 60250 Relative Permittivity (at 1MHz) 2.9 - IEC 60250 Dissipation Factor (at 100 MHz) 73.0 10^{-4} IEC 60250 Dissipation Factor (at 1 MHz) 90.0 10^{-4} IEC 60250 Volume Resistivity 1.0e+16 Ohm·m IEC 60093 Surface Resistivity 1.0e+16 Ohm IEC 60093 Electric Strength 35.0 kV/mm IEC 60243-1 - Processing Information (Injection Molding)
Value Units Test Method / Conditions Injection Molding-Melt Temperature 240.0 ºC ISO 294 Injection Molding-Mold Temperature 80.0 ºC ISO 294 Injection Molding-Injection Velocity 240.0 mm/s ISO 294 - Rheological Properties
Value Units Test Method / Conditions Melt Volume-Flow Rate (at 220°C, 10kg) 32.0 cm³/(10 min) ISO 1133 Molding Shrinkage (Parallel, 150x105x3) 0.6 % acc. ISO 2577 Molding Shrinkage (Normal, 150x105x3) 0.6 % acc. ISO 2577