Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Cables insulated with SUPEROHM® 3443 EPR are suitable for 150°C AWM, Apparatus and Motor Lead applications. Other potential applications include transit, tunnel, and subway signal wiring.
Properties
- Physical Form
- Mechanical Properties
Value Units Test Method / Conditions Elongation 320 % ASTM D-412 Specific Gravity 1.35 - ASTM D-1505 Tensile Strength 1500 psi ASTM D-412 - Thermal Properties
Value Units Test Method / Conditions Retained Elongation (7 days in 158°C air oven) 82 - ASTM D-573 Retained Elongation (7 days in 180°C air oven) 62 - ASTM D-573 Retained Tensile (7 days in 158°C air oven) 120 - ASTM D-573 Retained Tensile (7 days in 180°C air oven) 145 - ASTM D-573 - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 650 V/mil ASTM D-149 Heat Shock (1 hr at 150°C) Pass - UL 1581 - Combustion Properties
Value Units Test Method / Conditions FlaMinutesg Average (After 4 Minutesutes) 3 Ds - FlaMinutesg Average 26 Dm - Non FlaMinutesg Average (After 4 Minutesutes ) 2 Ds - Non FlaMinutesg Average 87 Dm - Acid Gas Equivalent min. 0.01 Toxicity Index (per 100g) 1 - - Limited Oxygen Index 26 % - Horizontal Flame Test Pass - - Vertical Flame Test Pass - -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Specifications
- When extruded and cured consistent with standard safe wire and cable practices, cables insulated with SUPEROHM® 3443 are recognized by UL for Styles including 3374, 3328, 3330, 3340, and 3484.
- Certification
- Certified Test Results including physical test data are included with each shipment.
Technical Details & Test Data
- Processing
SUPEROHM® 3443 compounds are engineered to be processed on conventional extrusion equipment. Use of a L/D 15:1 to 24:1 extruder with a single flighted, general purpose, tapered
screw for proper homogenization and fluxing of SUPEROHM® 3443 compound is recommended to obtain optimal output and properties. The compound supplied is in the cleanest state and is of the highest quality; however, the use of a breaker plate with a screen pack of approximately 20/40 or 20/40/20 mesh is recommended for optimal rheological flow and steady back pressure.
Pre-drying of the compound is not necessary, provided that the compound has been stored
unopened in a cool, dry area.
The following conditions are given as a guide for processing:Temperature Profile:
°F
°C
Cross Head
220
104
Zone 1 (feed):
220
104
Zone 2:
220
104
Zone 3:
220
104
Zone 4:
220
104
Head:
180
82
Die:
160-190
71-82
Packaging & Availability
- Packaging Type
- Packaging
- 1,750 pounds (794 Kg) per box.
Storage & Handling
- Storage
- SUPEROHM® 3443 containers should be stored at temperatures below 50°C (120°F) in a dry area avoid massing of pellets. Product is recommended to be used within 12 Months.
- Handling
- To ensure health and safety, Material Safety Data Sheets (MSDS) are available and should be consulted prior to use.