Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- INCI Name
- Agrochemical Functions
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Plastics & Elastomers Functions
- CAS No.
- 110615-47-9
- EC No.
- 600-975-8
- Technologies
- Product Families
- Product Image
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- HII Features
- Materials Features
- Advantages of Ground Walnut Shell
Safety/Environmentally Sound
- Non-toxic and biodegradable
- Requires no flammable solvents
- Dust free
- Natural product
- Use required on most U.S. Government contracts
- Found not to cause Silicosis (can occur from use of sand or silica products)
Cost Effective
- Cleans without leaving scratches or pitting
- Cleaned parts require no additional machining or fitting
- Cleans precision parts without a change in dimensions
- Non-corrosive
- Lightweight
- Pollution prevention
Fast
- Surface areas require no drying time
- Easy to use
- Fast clean up after use
- Easy disposal process
Elasticity and Durability
- Resistant to rupture and deformation
- Limited breakdown
- Can be re-used in various applications
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Application Format
- Home Care Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Industries and Applications
- Polishing (Brass, Aluminum, Metals)
- Deburring
- Deflashing
- Drilling Fluids
- Scale Modeling
- Carriers (Pesticides, Herbicides)
- Molded Plastics
- Anti-Slip/Anti-Skid
- Blasting
- Infill Material
- Ceramic Burn -Out Media
- Cosmetic Exfoliates (Hand, Face, Body, Foot)
Properties
- Physical Form
- Appearance
- Light Brown Granules
- Odor
- No Odor
- Specifications
Value Units Test Method / Conditions Dry Packing Density 30 - 50 lbs per cu ft - Elastic Modulus (MOE) 22900 - - Flash Point 380 °F - Free Moisture (at 80°C for 15 Hrs) 3 - 9 % Hardness – Vickers No. 25 - 30 - - Mohs Scale 3 - 4 - - pH (at 250°C in water) 4 - 6 - - Relative Density/Specific Gravity 1.2 - - - Media Sizes
- 0.25 mm - 0.50 mm
- 0.0098 in - 0.0197 in
- Cosmetic Sizes
- 0.25 mm - 0.50 mm
- 0.0098 in - 0.0197 in
- Note
Millimeter and inch measurements are approximate.
Regulatory & Compliance
- Safety, Healthy and Environmental Regulations/ Legislations
- US Federal Regulations:
U.S. OSHA (Occupational Safety and Health Administration) Specifically Regulated Substances (29 CFR1910.1001-1050)
No components of this product are present at concentrations greater than or equal to 0.1% and are identified as a carcinogen or potential carcinogens by OSHA.
SARA/CERCLA reporting requirements:
No components of this product are found at concentrations greater than or equal to 0.1% and are subject to the SARA/CERCLA reporting requirements.
State Right-to-Know Regulations
No components of this product are found at concentrations greater than or equal to 0.1% and are subject to state Right-to-Know reporting requirements.
- EU - REACH Status:
A registration number is not available for Walnut Shell and is exempted from registration.
- CANADA – WHMIS (Workplace Hazardous Materials Information System) Classification:
Not a controlled product under Canada WHMIS (Workplace Hazardous Materials Information
System) classification scheme.- MEXICO:
Hazard Classification: 1-1-0
Carcinogen Status: No data available.
Technical Details & Test Data
- Screen Analysis and Typical Percentage Retained
U.S. Mesh 30 35 45 60 Size (um) 600 500 355 250 35/60 0 2.0 72.0 24.0 - Note
Typical percentage retained is approximate and may vary due to the characteristics of walnut shell. Certificates of Analysis (COA) are per lot produced and supplied upon request at the time of purchase.
Storage & Handling
- Conditions for Safe Storage
- Observe good industrial hygiene practices.
- Store away from incompatible materials
- Provide adequate ventilation.