Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Agrochemical Functions
- CASE Ingredients Functions
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Product Image
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- HII Features
- Materials Features
- Advantages of Ground Walnut Shell
Safety/Environmentally Sound
- Non-toxic and biodegradable
- Requires no flammable solvents
- Dust free
- Natural product
- Use required on most U.S. Government contracts
- Found not to cause Silicosis (can occur from use of sand or silica products)
Cost Effective
- Cleans without leaving scratches or pitting
- Cleaned parts require no additional machining or fitting
- Cleans precision parts without a change in dimensions
- Non-corrosive
- Lightweight
- Pollution prevention
Fast
- Surface areas require no drying time
- Easy to use
- Fast clean up after use
- Easy disposal process
Elasticity and Durability
- Resistant to rupture and deformation
- Limited breakdown
- Can be re-used in various applications
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Home Care Applications
- Industrial Additives End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Industries and Applications
- Polishing (Brass, Aluminum, Metals)
- Deburring
- Deflashing
- Fillers (Plush Toys, Home Decor)
- Drilling Fluids
- Scale Modeling
- Carriers (Pesticides, Herbicides)
- Carrier/Broadcast Media - Seeds
- Molded Plastics
- Anti-Slip/Anti-Skid
- Blasting
- Filtration Media (Water, Oil)
- Infill Material
Properties
- Physical Form
- Appearance
- Light Brown Granules
- Odor
- No Odor
- Specifications
Value Units Test Method / Conditions Dry Packing Density 30 - 50 lbs per cu ft - Elastic Modulus (MOE) 22900 - - Flash Point 380 °F - Free Moisture (at 80°C for 15 Hrs) 3 - 9 % Hardness – Vickers No. 25 - 30 - - Mohs Scale 3 - 4 - - pH (at 250°C in water) 4 - 6 - - Relative Density/Specific Gravity 1.2 - - - Media Sizes
- 1.40 mm - 0.66 mm
- 0.0234 in - 0.555 in
- Note
Millimeter and inch measurements are approximate.
Regulatory & Compliance
- Safety, Healthy and Environmental Regulations/ Legislations
- US Federal Regulations:
U.S. OSHA (Occupational Safety and Health Administration) Specifically Regulated Substances (29 CFR1910.1001-1050)
No components of this product are present at concentrations greater than or equal to 0.1% and are identified as a carcinogen or potential carcinogens by OSHA.
SARA/CERCLA reporting requirements:
No components of this product are found at concentrations greater than or equal to 0.1% and are subject to the SARA/CERCLA reporting requirements.
State Right-to-Know Regulations
No components of this product are found at concentrations greater than or equal to 0.1% and are subject to state Right-to-Know reporting requirements.
- EU - REACH Status:
A registration number is not available for Walnut Shell and is exempted from registration.
- CANADA – WHMIS (Workplace Hazardous Materials Information System) Classification:
Not a controlled product under Canada WHMIS (Workplace Hazardous Materials Information
System) classification scheme.- MEXICO:
Hazard Classification: 1-1-0
Carcinogen Status: No data available.
Technical Details & Test Data
- Note
Typical percentage retained is approximate and may vary due to the characteristics of walnut shell. Certificates of Analysis (COA) are per lot produced and supplied upon request at the time of purchase.
Storage & Handling
- Conditions for Safe Storage
- Observe good industrial hygiene practices.
- Store away from incompatible materials
- Provide adequate ventilation.