Ecomass® Compound 1950CO75

Ecomass® Compound 1950CO75 is a copper powder-filled polyamide (PA6/10) compound that exhibits good toughness. The processing method for this compound is injection molding. Ecomass® Compound 1950CO75 is a nontoxic alternative to lead (Pb) used for weighting, balancing, and radiation shielding applications.

Brand: Ecomass (150 products)

Polymer Name: Polyamide 610 (PA 610)

Fillers Included: Copper

Density: 3800.0 - 3800.0 kg/m³

Processing Methods: Injection Molding, Injection Molding

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Polyamides
Fillers Included: Copper
Polymer Name: Polyamide 610 (PA 610)
Plastics & Elastomers Functions: Resin
Technologies: Composite Materials,
Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyamides
Composite Materials — Polymers & Resins
Thermoplastic Resins

Features & Benefits

Labeling Claims: Non-Toxic
Materials Features: Good Toughness,
Heavy Plastic,
Hot Operating Temperature,
Lead Substitute,
Medium Density,
Non-Toxic

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics,
Healthcare & Pharma
Applications: Healthcare & Pharma — Medical
Medical Devices & Assemblies
Electrical & Electronics — Parts & Components
Housings & Enclosures
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Casino Chips,
Frangible Projectiles,
Golf Club Weights,
Hub Odometer,
Inertia Discs,
Instrument Housing,
Manual Transmission Shifter Cartridge,
Medical Devices,
Radiation Shielding,
Return Weights
Composites Processing Methods: Injection Molding
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Physical Form

Physical Properties


	Value	Units	Test Method / Conditions
Density	3.8	g/cc	Internal

Mechanical Properties


	Value	Units	Test Method / Conditions
Tensile Strength	29	MPa	ISO 527
Tensile Modulus	8000	MPa	ISO 527
Tensile Elongation at Break	6	%	ISO 527
Flexural Modulus	6500	MPa	ISO 178
Izod Impact Strength, Notched	6	KJ/m	ISO 180/A

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Melt Temperature Range	230 - 250	°C	-
Mold Temperature Range	65 - 80	°C	-
Mold Shrinkage Rate	1.0 - 1.2	%	Internal
Pre-Drying Conditions (at 80°C)	4 - 6	hrs	Target moisture max. 0.20%

Regulatory & Compliance

Certifications & Compliance: RoHS Compliant