Ecomass® Compound 1700ZG92

Ecomass® Compound 1700ZG92 is a high-specific-gravity, metal powder-filled polyamide 12 (PA12) compound that exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting, balancing, and radiation shielding applications.

Brand: Ecomass (150 products)

Polymer Name: Polyamide 12 (PA 12)

Fillers Included: Metal

Density: 6200.0 - 6200.0 kg/m³

Processing Methods: Injection Molding, Injection Molding

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Polyamides
Fillers Included: Metal
Polymer Name: Polyamide 12 (PA 12)
Plastics & Elastomers Functions: Resin
Technologies: Composite Materials,
Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyamides
Composite Materials — Polymers & Resins
Thermoplastic Resins

Features & Benefits

Labeling Claims: Non-Toxic
Materials Features: Good Toughness,
Heavy Plastic,
High Density,
High Density Thermoplastic Composite,
High Specific Gravity,
Hot Operating Temperature,
Lead Substitute,
Non-Toxic

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics,
Healthcare & Pharma
Applications: Healthcare & Pharma — Medical
Medical Devices & Assemblies
Electrical & Electronics — Parts & Components
Housings & Enclosures
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Casino Chips,
Frangible Projectiles,
Golf Club Weights,
Hub Odometer,
Inertia Discs,
Instrument Housing,
Manual Transmission Shifter Cartridge,
Medical Devices,
Radiation Shielding,
Return Weights
Composites Processing Methods: Injection Molding
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Physical Form

Physical Properties


	Value	Units	Test Method / Conditions
Density	6.2	g/cc	ASTM D792

Mechanical Properties


	Value	Units	Test Method / Conditions
Tensile Strength	41	MPa	ASTM D638
Tensile Modulus	6586	MPa	ASTM D638
Tensile Elongation at Break	2	%	ASTM D638
Flexural Modulus	5655	MPa	ASTM D790
Flexural Strength	50	MPa	ASTM D790
Izod Impact Strength, Notched	107	J/m	ASTM D256

Thermal Properties


	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 66 psi)	121	°C	ASTM D648
Heat Deflection Temperature (at 264 psi)	107	°C	ASTM D648

Electrical Properties


	Value	Units	Test Method / Conditions
Surface Resistivity	0.21	ohms/sq	ASTM D257

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Melt Temperature Range	205 - 255	°C	-
Mold Temperature Range	55 - 85	°C	-
Mold Shrinkage Rate	0.5 - 0.6	%	ASTM D955
Pre-Drying Conditions (at 75°C)	4	hrs	-

Regulatory & Compliance

Certifications & Compliance: RoHS Compliant