Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Complies with many state Department of Transportation requirements
- Can be purchased with the container range of 1 gal (can), 3.5 gal (pail), 4.5 gal (pail), 5 gal (pail), and 55 gal (drum)
- Available in black or gray, (55 gallon drum must be gray)
- Easy to use just mix the hardener provided in and pour
- Fast drying and curing times in most weather conditions, 5 to 10 minutes and 20 to 25 minutes respectively
- Resistant to most chemicals and solvents including road salts, acids, hydrocarbons, brake fluids, oils, gasoline and jet fuel.
- Low Viscosity, self leveling
- Strength to withstand stress from traffic and weather conditions
- 15 to 20 minute dry time and 30 to 35 minutes cure time
- Advantages
- Two part, component system, utilizing a liquid methyl ethyl ketone peroxide (MEKP) hardener.
- Bonds to all road surfaces
- Self leveling liquid / Pours fluidly
- Requires no special equipment, just mix and pour
- Cures in less than 40 minutes to produce a tough weather resistant seal
- Adjustable dry times regulated by amount of hardener (MEKP) added
- Totally encapsulates traffic detector loop wire
- Will not react with wire insulation
- Formulated to withstand stresses due to traffic vibrations
- Resistant to cracking caused by expansion and contraction due to temperature changes
- Resistant to most chemicals and solvents including road salts, acids, hydrocarbons, brake fluids, oils, gasoline and jet fuel
- Available in 1 Gal., 3.5 Gal., and 5 Gal. pails
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Application Instructions
- For best results STAT-A-FLEX should be mixed with a powered mixer
- Mix for one minute, then pour in desired amount of hardener and mix for two minutes
- Pour STAT-A-FLEX into saw cut to be filled (It's that easy!)
- Hardener component amounts may be adjusted according to temperature
- An ACCELERATOR is also available for use in colder climates to further reduce drying time
- NOTE: Improper mixing may cause poor results
Properties
- Typical Properties
Value Units Test Method / Conditions Weight Per Gallon approx. 11 lbs - Hardness (24 Hours) 55 - 65 Shore D ASTM D2240 Viscosity 104 KU - Gel Time (77°F) 12 – 20 minutes ASTM C881 Curing Time (77°F) 30-40 minutes - Elongation 18-25 % ASTM D638-96 Tensile Strength min. 1100 psi ASTM D638-96 Water Absorption 24 Hr 0.2 - ASTM D570 No. 3 Oil 0.02 - ASTM D570 Gasoline 0.04 - ASTM D570 3% NaCl 0.2 % ASTM D570
Packaging & Availability
Storage & Handling
- Storage and Shelf Life
- Best if stored at temperatures under 80 °F
- Shelf life of 12 months (unopened)