Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Applications & Uses
INTENDED USES
Recommended for OEM, heavy equipment, marine and industrial structures where abrasion resistance, color and gloss retention is required.
SURFACE PREPARATION
Surfaces that are to be coated must be clean, dry and free of surface contaminants.
THINNINGDo not exceed regulatory limits
- Brush/Roll – Not normally required, recommended no more than 10% reduction with T8004 Xylene Reducer.
- Airless Spray – If required 5-10% of T8004 Xylene Reducer (½ pint per gallon)
- Conventional – Reduce up to 20% or as needed with T8004 Xylene Reducer.
Catalyzing
12 Series Acrylic Enamel can be mixed with 11LG000 urethane catalysts to improve color, gloss and film toughness. Mix ratio is 8% by weight or up to 9oz. in a full gallon, pot life after activation is 6 hours at 75°F.APPLICATION
- Airless – recommended tip sizes (.015-.018)
- Conventional – Binks Model 2001 or equivalent
- HVLP – Binks Model Mach 1
- Brush/Roll – Small areas only
PRIMER
- 42 Series Phenolic Alkyd
- 69 Series High Solids Q.D. Alkyd
- 52 Series Epoxy Mastic
CLEANING UP
Xylene, MEK
Properties
- Typical Properties
Value Units Test Method / Conditions Vehicle Type Acrylic - - Finish High Gloss - - Solids By Volume 32 - 36 % - Solids By Weight 32.0 % - Viscosity 60 - 65 Krebs - V.o.C. 3.5 Ibs. per gal - Recommended Dry Film Thickness 2 - 3 mils - Theoretical Coverage 250 - 375 sq.ft. per gal. - Dry Time (77°F, Tack Free) 20.0 minutes - Dry Time (77°F, Handle) 1.0 hour - Dry Time (77°F, Recoat) 2 - 24 hours -
Regulatory & Compliance
- Compliance
COMPLIANCE: Federal Regulations
RULE CATEGORY MAXIMUM LEVELS COMPLIANT NESHAP High Gloss 420 g/l Yes Automobile Refinishing Single Stage Top Coat 600 g/l Yes AIM Industrial Maintenance 450 g/l Yes
Safety & Health
- Safety
Products are intended for industrial use only, improper handling and misuse may be hazardous.
Packaging & Availability
- Ordering
These products are available in 1 and 5 gallons kits.
Storage & Handling
- Pot Life (If Catalyzed )
- 6.0
- Storage & Handling
Shelf-Life
Solvent Based Alkyds and Acrylics:
- 12 months from date of manufacture to meet original QC specifications.
- factory sealed containers stored under normal warehouse conditions.
- Practical” shelf life of oil based paints can be up to 2 to 3 years if container has not been opened.