Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- INCI Name
- Cosmetic Ingredients Functions
- CAS No.
- 68610-92-4, 81859-24-7, 53568-66-4, 54351-50-7, 55353-19-0
- EC No.
- 617-262-2, 611-015-2, 614-667-6
- Technologies
- Product Families
- The Idealized Structure of UCARE Polymers
Features & Benefits
- Benefit Claims
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Application Format
- Bath & Shower Applications
- Hair Care Applications
- Skin Care Applications
- Use Level
- 0.2 - 0.5 (Body wash), 0.2 - 0.5 (Creams and lotions), 0.2 - 0.5 (Hair styling products), 0.2 - 0.5 (Shampoo Systems)
- Applications
- UCARE™ polymers are used in a diverse number of applications across both hair and skin care. Perhaps the most notable for the UCARE™ JR-30M Polymer is its ability to provide substantive conditioning from shampoo systems.
- Methods of Addition
There are two basic methods for preparing UCARE™ Polymers for incorporation into your formulation.
Prior Polymer Hydration
- Hydration of the polymer is accomplished by slowly adding the dry powder into agitated room temperature water and allowing it to mix until the solution is uniform and clear.
- Hydration can be accelerated by heating the solution to 65°C. Once the polymer is fully hydrated, simply add the solution directly to the surfactant system blend with mixing.
- Hydration may be accomplished separately or as a first step in the manufacturing procedure.
Addition with Co-Solvents
- A slurry of the dry powder may be made in a non-aqueous, water soluble, co-solvent (such as propylene glycol, glycerin, low molecular weight CARBOWAX™ Polyethylene Glycols, or Methyl Gluceth-10 or -20).
- The slurry can then be mixed into the water or directly into the surfactant blend.
- Hydration can be accelerated by heating the solution to 65°C.
- The co-solvent "wets" the polymer and allows it to be more easily dispersed, thus increasing the rate of hydration whether it is in the water or directly put into the surfactant blend.
Properties
- Physical Form
- Insoluble in
- Water
- Typical Properties
Value Units Test Method / Conditions Ash Content 0 - 3 wt% DOWM102564 Nitrogen Content 1.50 - 2.20 wt% DOWM102039 Particle Size (Through 20 mesh, < 841 micron) 95 - 100 % DOWM102580 Viscosity (1% aqueous solution) 1250 - 2250 cP - Volatiles Content 0 - 6 wt% DOWM102513
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Technical Details & Test Data
- Limitations
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Safety & Health
- Health And Environmental Information
- To support customers in their product safety needs, Dow has an extensive Product Stewardship organization and a team of product safety and regulatory compliance specialists available in each area.
- For further information, please see our website, consumer.dow.com or consult your local Dow representative.
Storage & Handling
- Handling Precautions
- Product safety information required for safe use is not included in this document. Before handling, read Product and Safety data sheets and container labels for safe use, physical and health hazard information. The safety data sheet is available on the dow website at dow.com, or from your dow sales application engineer, or distributor, or by calling dow customer service.
- Usable Life and Storage
Store in a dry place. Protect from atmospheric moisture. Avoid prolonged exposure to heat and air.