Dioki GPPS® 610

Dioki GPPS® 610 is transparent general purpose polystyrene exhibiting excellent optical properties, good melt flow properties. Dioki GPPS® 610 is especially intended for injection molding of thin-walled products having good optical properties. This polystyrene grade exhibits excellent processability with short processing cycles.

Brand: Dioki GPPS (7 products)

Polymer Name: General Purpose Polystyrene (GPPS)

Processing Methods: Injection Molding

Melt Flow Index: 11.0 - 11.0 g/10 min

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Styrenics
Polymer Name: General Purpose Polystyrene (GPPS)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Basic Thermoplastics
Styrenics

Features & Benefits

Materials Features: Excellent Melt Flow,
Excellent Transparency Properties,
General Purpose,
Good Optical Properties,
Good Processability,
Shorter Cycle Time

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics,
Printing & Packaging
Applications: Electrical & Electronics — Devices & Assemblies
Consumer Electronics
Consumer Goods — Other Consumer Goods Applications
Printing & Packaging — Packaging
Healthcare Packaging,
Non-Food Consumer Packaging
Plastics & Elastomers End Uses: Cosmetic Packaging,
General Purpose,
Medical Packaging,
Medical/Healthcare Applications,
Pharmaceutical Packaging,
Toys
Plastics & Elastomers Processing Methods: Injection Molding
Application: XPS, Manufacture of injection molded, thin-walled, general purpose products, internal refrigerator parts, toys, packaging in cosmetics and medicine, toys.

Properties

Physical Form

Mechanical Properties


	Value	Units	Test Method / Conditions
Elongation at Break	1,2	%	ASTM D 638
Izod Impact Resistance, Notched (23°C)	11,5	J/m	ASTM D 256
Modulus	3120	MPa	ASTM D 790
Strength	72	MPa	ASTM D 790
Strength at Break	37,5	MPa	ASTM D 638
Tensile Modulus	3150	MPa	ASTM D 638

Thermal Properties


	Value	Units	Test Method / Conditions
Heat Distortion Temp. (Metot B, 0.45 MPa)	82	°C	ASTM D 648
Vicat Softening Temperature (Rate B, 10N)	95	°C	ASTM D 1525

Typical Properties


	Value	Units	Test Method / Conditions
Melt Flow Index (200°C/ 5kg)	11	g/10 min	ASTM D 1238
Density	1040	kg/m3	ISO 1183

Processing Parameters


	Value	Units	Test Method / Conditions
Mould Shrinkage	0,4-0,6	%	-
Processed in Melt Temperature Range	170-230	°C	-
Tool Temperature	20-60	°C	-

Packaging & Availability

Packaging Type: Bags
Packaging: DİOKİ GPPS 603® is packed in polyethylene bags of 25 kg on wooden pallets having dimensions of 110x130 cm as 1 pallet net 1.375 kg. (Depend on the costumers demand, net 1.250 kg bigbag can be supplied) The pallets are covered and secured with stretch film.

Storage & Handling

Storage And Handling: DİOKİ GPPS 603® should be protected from direct sunlight and rain/water. If possible, it should stored in dry, cool and closed area.